The principle of the disc planetary reducer is a power transmission mechanism that uses a gear speed converter to decelerate the number of revolutions of the motor to the required number of revolutions and obtain a larger torque.
How to reduce the failure of the disc planetary reducer:
1. All the ball bearings on both sides of the motor main shaft are replaced with special nylon sleeves, which can eliminate the occurrence of bearing breakage.
2. Replace the thickened coupling to reduce the gap between it and the main shaft.The couplings of 182 motors in the venue were fully replaced and checked regularly.
3. Add anti-loose device to the disc planetary reducer.A 2mm×20mm iron plate is processed into a round hoop, and the spring cap of the reducer of 182 motors is wrapped with an iron hoop and tightened with screws, so that the nut of the reducer spring cap will not loosen.
4. Organize employees to conduct special study on the daily maintenance, centralized maintenance procedures and quality standards of the planetary reducer, and use the marshalling stop time to conduct practical exercises to check whether it meets the standards of the standardized operating procedures.
5. Replace the thick screws and increase the number of screws.Remove the 4 5mm screws of the original motor cam box, drill and tap the base again, replace with 6mm screws, and add 2 screws on both sides of the cam box, so that the main shaft will not move and ensure the cam contact Good contact.
The above is the related matters of the disc planetary reducer, I hope it can be helpful to you.