Solution Description
Merchandise Description
The reducer is normally utilised for lower-pace and substantial-torque transmission equipment. The motor, internal combustion engine or other higher-pace working power is used to attain the purpose of deceleration by meshing with the big equipment on the output shaft by way of a gear with a small number of teeth on the input shaft of the reducer. The reducer will also have numerous pairs of gears with the very same theory to accomplish the ideal reduction influence. The ratio of the quantity of tooth of the large and modest gears is the transmission ratio.
| SPECIFICATIONS | Stage | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | four | 25 | ||
| five | 28 | ||||
| 7 | 20 | ||||
| ten | 10 | ||||
| L2 | sixteen | 30 | |||
| 20 | 30 | ||||
| twenty five | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| fifty | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Enter Pace (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault cease torque(N.m) | 2 instances of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average existence span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.ninety five-4.5 | ||||
| IP | 54 | ||||
| Installation technique | Any set up method | ||||
Creation Assortment
forty two Collection Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: twelve,16,20,twenty five,28,35,forty,fifty,70
Body Dimension: 42mm Enter Flange
Gear Arrangement: Planetary Straight Tooth
60 Sequence Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,forty,50,70
Frame Dimension: 60mm Input Flange
Equipment Arrangement: Planetary Straight Tooth
90 Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,10,
L2: 16,twenty,twenty five,28,35,forty,50,70
Body Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Enamel
Powder Metal Series Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Selection:
L1: 4,5,7,ten,
L2: 16,twenty,25,28,35,40,fifty,70
Frame Dimension: 42mm & 57mm
Equipment Arrangement: Planetary Straight Tooth
Appropriate Angle Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,40,fifty,70
Frame Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Enamel
Software Area
Automated Arms
Assembly Line
3D-Printer
Medical -Gear
CNC Machine
Tapping Device
Other Automation Products
Why Decide on Us
ZheJiang Substantial Precision Gear Transmission Co., Ltd
Business
ZheJiang High Precision Gear Transmission Co., Ltd positioned in HangZhou city, ZheJiang Province, China. It is a major company devoted in precision transmission elements and technique analysis, manufacture and revenue, various sequence of items are manufactured in its 5000 square meters workshop, the precision planetary gearbox and equipment motor are produced especially for solar strength business and have served many big-scale photo voltaic assignments worldwidely.
The analysis team has far more than 15 many years encounters in this area, who can ensure a punctual and effective services to meet up with customer’s specific requirements. It has pasted the ISO9001 high quality administration method and CE, goods have been exported to lots of nations with a vast selection software in AGV, clever robot, logistic, industrial automation, photo voltaic vitality, vessel, packaging and textile and so on.Constantly, our aim is to advertise the software of solar energy industry in the world, and we think it offers thoroughly clean and sustainable strength for humanity to much better defend our setting.
WORKSHOP
CERTIFICATIONS
FAQ
Q:Which regions are your goods primarily used in?
A:At present, we have 2 major items: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are utilized in automation fields, this kind of as health-related products, 3D printers, door openers, tapping machines, CNC lathes and a collection of automation products. In addition, our photo voltaic geared motors are utilised in photovoltaic electrical power technology projects, which are largely combined with rotary drives to drive photo voltaic panels to observe sunlight.
Q : How to select the ideal planetary gearbox?
A :Initial of all, we require you to be CZPT to supply related parameters. If you have a motor drawing, it will enable us recommend a ideal gearbox for you quicker. If not, we hope you can give the subsequent motor parameters: output speed, output torque, voltage, current, IP, noise, functioning circumstances, motor dimensions and energy, and many others.
Q : What is the price ?
A : The principal determining factor for the price of each solution is the purchase quantity. You can talk with us and let us recognize every other. I think that our rates, solution top quality and our services can undoubtedly make you satisfied.
Q : Do you give personalized services?
A: Sure, we supply tailored services. You only require to set ahead your wants, and we will do our greatest to offer you with a plan, make strategies, and try out our ideal to satisfy your requirements.
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Double-Step |
###
| Samples: |
US$ 80/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | 4 | 25 | ||
| 5 | 28 | ||||
| 7 | 20 | ||||
| 10 | 10 | ||||
| L2 | 16 | 30 | |||
| 20 | 30 | ||||
| 25 | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| 50 | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Input Speed (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault stop torque(N.m) | 2 times of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average life span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.95-4.5 | ||||
| IP | 54 | ||||
| Installation method | Any installation method | ||||
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Double-Step |
###
| Samples: |
US$ 80/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | 4 | 25 | ||
| 5 | 28 | ||||
| 7 | 20 | ||||
| 10 | 10 | ||||
| L2 | 16 | 30 | |||
| 20 | 30 | ||||
| 25 | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| 50 | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Input Speed (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault stop torque(N.m) | 2 times of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average life span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.95-4.5 | ||||
| IP | 54 | ||||
| Installation method | Any installation method | ||||
Types, Applications, and Lubrication of Planetary Gearboxes
A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.
Applications of planetary gearboxes
The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.
Types
There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
Design
A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.
Lubrication
Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
Applications
This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.
editor by czh 2022-12-24
