Tag Archives: transmission gear

China Best Sales Ratio 40: 1 Gear Reducer Right Angle Helical Transmission Planetary Gearbox for Stepper Motor comer planetary gearbox

Product Description

Ratio 40:1 Gear Reducer Right Angle Helical Transmission Planetary Gearbox for Stepper Motor

Characteristics:
(1) Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
(2) High Precision:Backlash is 3 arcmin or less,accurate positioning.
(3) High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
(4) High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
(5) Maintenance-Free:Low grease wear,can be lifetime lubrication.
(6) Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Wide Applicability:Applicable to any type of servo motor.
(9) An organic [integral] whole output axis.

Product Parameters

Specifications				PXR42	PXR60	PXR90	PXR120
Technal Parameters				PXR42	PXR60	PXR90	PXR120
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	780	1530	3300	6700
Max. Axial Load			N	390	600	1500	3000
Torsional Rigidity			Nm/arcmin	2.5	6	12	23
Max.Input Speed			rpm	8000	8000	6000	6000
Rated Input Speed			rpm	4000	4000	3000	3000
Noise			dB	≤56	≤64	≤66	≤66
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥90%
Return Backlash	P1	L1	arcmin	≤3	≤5	≤5	≤5
	P1	L2	arcmin	≤5	≤7	≤7	≤7
	P2	L1	arcmin	≤5	≤8	≤8	≤8
	P2	L2	arcmin	≤7	≤10	≤10	≤10
Moment Of Inertia Table	L1	3	Kg*cm2	/	0.4	2.28	6.87
		4	Kg*cm2	0.12	0.4	2.28	6.87
		5	Kg*cm2	0.09	0.4	2.28	6.87
		7	Kg*cm2	0.09	0.4	2.28	6.87
		8	Kg*cm2	/	0.4	1.45	4.76
		10	Kg*cm2	0.09	0.3	1.45	4.76
		14	Kg*cm2	/	0.4	2.28	6.87
		20	Kg*cm2	/	0.4	2.28	6.87
	L2	25	Kg*cm2	0.09	0.4	2.28	6.87
		30	Kg*cm2	/	0.4	2.28	6.87
		35	Kg*cm2	0.09	0.4	2.28	6.87
		40	Kg*cm2	0.09	0.4	2.28	6.87
		50	Kg*cm2	0.09	0.3	1.45	4.76
		70	Kg*cm2	0.09	0.3	1.45	4.76
		100	Kg*cm2	0.07	0.3	1.45	4.76
Technical Parameter	Level	Ratio		PXR42	PXR60	PXR90	PXR120
Rated Torque	L1	3	Nm	/	40	105	165
		4	Nm	17	45	130	230
		5	Nm	15	45	130	230
		7	Nm	12	45	100	220
		8	Nm	/	45	90	200
		10	Nm	10	45	130	230
		14	Nm	/	45	100	220
		20	Nm	/	30	75	175
	L2	25	Nm	15	45	130	230
		30	Nm	/	40	105	165
		35	Nm	15	45	130	230
		40	Nm	17	45	130	230
		50	Nm	15	45	130	230
		70	Nm	12	45	130	230
		100	Nm	15	46	130	230
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.7	2.05	6.45	13.7
Weight	L2		kg	0.9	3.15	8.8	17.2

Company Profile

Packaging & Shipping

1. Lead time: 10-15 working days as usual, 30 days in busy season, it will based on the detailed order quantity;
2. Delivery of samples: by DHL, Fedex, UPS, TNT, EMS

FAQ

1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc

4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts

5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Automation Equipment
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Samples:	US$ 168/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

planetarygearbox

Planetary Gearbox Basics

If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.

Wheel drive planetary gearboxes

Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.

Spur gears

There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
planetarygearbox

Helical gears

A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.

Various sizes

There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
planetarygearbox

Applications

This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.

China Best Sales Ratio 40: 1 Gear Reducer Right Angle Helical Transmission Planetary Gearbox for Stepper Motor comer planetary gearbox
editor by CX 2023-06-12

China Professional Hot-Selling Planetary Gear Reducer Low Backlash Transmission Gearbox for Cutting Equipment supplier

Product Description

New Hot-selling Planetary gear reducer Low backlash Transmission Gearbox For Cutting Equipment

Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.

Product Parameters

Characteristics:
1.Circular flange output,threaded reverse connection,standard size;
2.The input specifications are complete and there are many choices;
3.Straight transmission,single cantilever structurer,design simple,high cost performance;
4.Stable operation,low noise;
5.Keyway can be opened in the force shaft;
6.Size range:40-160mm;
7.Ratio range:3-100;
8.Precision range:8-16arcmin

Specifications				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Technal Parameters				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	185	240	400	450	1240	2250
Max. Axial Load			N	150	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	0.7	1.8	4.7	4.85	11	35
Max.Input Speed			rpm	8000	8000	6000	6000	6000	4000
Rated Input Speed			rpm	4500	4000	3500	3500	3500	3000
Noise			dB	≤55	≤58	≤60	≤60	≤65	≤70
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		4	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		5	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		7	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
		10	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
	L2	12	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		15	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		16	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		20	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		25	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		28	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		30	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		35	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		40	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		50	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		70	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		100	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
Technical Parameter	Level	Ratio		PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Rated Torque	L1	3	Nm	/	27	50	96	161	384
		4	Nm	16	40	90	122	210	423
		5	Nm	15	40	90	122	210	423
		7	Nm	12	34	48	95	170	358
		10	Nm	10	16	22	56	86	210
	L2	12	Nm	/	27	50	95	161	364
		15	Nm	/	27	50	96	161	364
		16	Nm	16	40	90	122	210	423
		20	Nm	16	40	90	122	210	423
		25	Nm	15	40	90	122	210	423
		28	Nm	16	40	90	122	210	423
		30	Nm	/	27	50	96	161	364
		35	Nm	12	40	90	122	210	423
		40	Nm	16	40	90	122	210	423
		50	Nm	15	40	90	122	210	423
		70	Nm	12	34	48	95	170	358
		100	Nm	10	16	22	96	80	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.43	0.95	2.27	3.06	6.93	15.5
Weight	L2		kg	0.65	1.2	2.8	3.86	8.98	17

Company Profile

Packaging & Shipping

1. Lead time: 7-10 working days as usual, 20 working days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

Application:	Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator
Function:	Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

Samples:	US$ 476/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

planetarygearbox

Planetary Gearbox Advantages and Disadvantages

A planetary gearbox is a type of mechanical drive with a single output shaft. They are suitable for both clockwise and counterclockwise rotations, have less inertia, and operate at higher speeds. Here are some advantages and disadvantages of this type of gearbox. Let us see what these advantages are and why you should use them in your applications. Listed below are some of the benefits of planetary gearboxes.

Suitable for counterclockwise and clockwise rotation

If you want to teach children about the clock hands, you can buy some resources for counterclockwise and asymmetrical rotation. These resources include worksheets for identifying degrees of rotation, writing rules for rotation, and visual processing. You can also use these resources to teach angles. For example, the translation of shapes activity pack helps children learn about the rotation of geometric shapes. Similarly, the visual perception activity sheet helps children understand how to process information visually.
Various studies have been done to understand the anatomical substrate of rotations. In a recent study, CZPT et al. compared the position of the transitional zone electrocardiographically and anatomically. The authors found that the transitional zone was normal in nine of 33 subjects, indicating that rotation is not a sign of disease. Similarly, a counterclockwise rotation may be caused by a genetic or environmental factor.
The core tip data should be designed to work in both clockwise and counterclockwise rotation. Counterclockwise rotation requires a different starting point than a clockwise rotation. In North America, star-delta starting is used. In both cases, the figure is rotated about its point. Counterclockwise rotation, on the other hand, is done in the opposite direction. In addition, it is possible to create counterclockwise rotation using the same gimbal.
Despite its name, both clockwise and counterclockwise rotation requires a certain amount of force to rotate. When rotating clockwise, the object faces upwards. Counterclockwise rotation, on the other hand, starts from the top position and heads to the right. If rotating in the opposite direction, the object turns counterclockwise, and vice versa. The clockwise movement, in contrast, is the reverse of counterclockwise rotation.

Has less inertia

The primary difference between a planetary gearbox and a normal pinion-and-gear reducer is the ratio. A planetary gearbox will produce less inertia, which is an important advantage because it will reduce torque and energy requirements. The ratio of the planetary gearbox to its fixed axis counterpart is a factor of three. A planetary gearbox has smaller gears than a conventional planetary, so its inertia is proportional to the number of planets.
Planetary gears are less inertia than spur gears, and they share the load across multiple gear teeth. This means that they will have low backlash, and this is essential for applications with high start-stop cycles and frequent rotational direction changes. Another benefit is the high stiffness. A planetary gearbox will have less backlash than a spur gearbox, which means that it will be more reliable.
A planetary gearbox can use either spur or helical gears. The former provides higher torque ratings while the latter has less noise and stiffness. Both types of gears are useful in motorsports, aerospace, truck transmissions, and power generation units. They require more assembly time than a conventional parallel shaft gear, but the PD series is the more efficient alternative. PD series planetary gears are suitable for many applications, including servo and robotics.
In contrast, a planetary gear set can have varying input speed. This can affect the frequency response of the gearset. A mathematical model of the two-stage planetary gears has non-stationary effects and correlates with experimental findings. Fig. 6.3 shows an addendum. The dedendum’s minimum value is approximately 1.25m. When the dedendum is at its smallest, the dedendum has less inertia.
planetarygearbox

Offers greater reliability

The Planetary Gearbox is a better option for driving a vehicle than a standard spur gearbox. A planetary gearbox is less expensive, and they have better backlash, higher load capacity, and greater shock loads. Unlike spur gearboxes, however, mechanical noise is virtually nonexistent. This makes them more reliable in high-shock situations, as well as in a wide range of applications.
The Economy Series has the same power density and torque capacity of the Precision Helical Series, but it lacks the precision of the latter. In contrast, Economy Series planetary gearboxes feature straight spur planetary gearing, and they are used in applications requiring high torque. Both types of gearboxes are compatible with NEMA servo motors. If torque density is important, a planetary gearbox is the best choice.
The Dispersion of External Load: The SSI model has been extensively used to model the reliability of planetary gear systems. This model takes the contact force and fatigue strength of the system as generalized stress and strength. It also provides a theoretical framework to evaluate the reliability of planetary gear systems. It also has many other advantages that make it the preferred choice for high-stress applications. The Planetary Gearbox offers greater reliability and efficiency than traditional rack and pinion gear systems.
Planetary gearing has greater reliability and compact design. Its compact design allows for wider applications with concerns about space and weight. Additionally, the increased torque and reduction makes planetary gearboxes an excellent choice for a wide variety of applications. There are three major types of planetary gearboxes, each with its own advantages. This article describes a few of them. Once you understand their workings, you will be able to choose the best planetary gearbox for your needs.

Has higher operating speeds

When you look at planetary gearboxes, you might be confused about which one to choose. The primary issue is the application of the gearbox. You must also decide on secondary factors like noise level, corrosion resistance, construction, price, and availability worldwide. Some constructors work faster than others and deliver the gearboxes on the same day. However, the latter ones often deliver the planetary gearbox out of stock.
Compared to conventional gearboxes, a planetary gearbox can run at higher speeds when the input speed fluctuates. However, these gears are not very efficient in high-speed applications because of their increased noise levels. This makes planetary gears unsuitable for applications involving a great deal of noise. That is why most planetary gears are used in small-scale applications. There are some exceptions, but in general, a planetary gearbox is better suited for applications with higher operating speeds.
The basic planetary gearbox is a compact alternative to normal pinion-and-gear reducers. They can be used in a wide variety of applications where space and weight are concerns. Its efficiency is also higher, delivering 97% of the power input. It comes in three different types based on the performance. A planetary gearbox can also be classified as a worm gear, a spur gear, or a sprocket.
A planetary gearhead has a high-precision design and can generate substantial torque for their size. It also reduces backlash to two arc-min. Additionally, it is lubricated for life, which means no maintenance is needed. It can fit into a small machine envelope and has a small footprint. Moreover, the helical crowned gearing provides fast positioning. A sealed gearbox prevents abrasive dust from getting into the planetary gearhead.
planetarygearbox

Has drawbacks

The design of a planetary gearbox is compact and enables high torque and load capability in a small space. This gear arrangement also reduces the possibility of wear and tear. Planet gears are arranged in a planetary fashion, allowing gears to shift under load and a uniform distribution of torque. However, some disadvantages of planetary gears must be considered before investing in this gearbox.
While the planetary gearbox is a high precision motion-control device, its design and maintenance requirements are a concern. The bearing load is high, requiring frequent lubrication. Also, they are inaccessible. Despite these drawbacks, planetary gearboxes are suitable for a variety of tasks. They also have low backlash and high torsional stiffness, making them excellent choices for many applications.
As a result, the speed of a planetary gearbox varies with load and speed. At lower ratios, the sun gear becomes too large in relation to the planet gears. As the ratio increases, the sun gear will become too low, reducing torque. The planetary gears also reduce their torque in high-speed environments. Consequently, the ratio is a crucial consideration for planetary gearbox condition monitoring.
Excess drag may result from out-of-tolerance components or excessive lubrication. Drag should be measured both in directions and be within acceptable ranges. Grease and oil lubrication are two common planetary gearbox lubricants, but the choice is largely dependent on your application. While grease lubricates planetary gears well, oil needs maintenance and re-lubrication every few thousand hours.

China Professional Hot-Selling Planetary Gear Reducer Low Backlash Transmission Gearbox for Cutting Equipment supplier
editor by CX 2023-05-08

China Three-Step 115 mm transmission fast gear box Small Spur Precision Planetary Gearbox planetary gearbox clutch

Item Description

In depth Photos

Merchandise Parameters

Notice : It truly is just the typical technological knowledge for you reference, The specification this kind of as voltage, speed, torque, shaft can be personalized by your needs. Please speak to us for more details. Many thanks.

Company Profile

FAQ

Q: What’re your major items?

A: We presently generate Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Large Precision Planetary Equipment Box and so on. You can examine the technical specs for over motors on our site and you can e mail us to advise needed motors per your specification as well.

Q: How to choose a suitable motor?
A:If you have motor pictures or drawings to show us, or you have thorough specs like voltage, pace, torque, motor size, operating method of the motor, necessary life time and noise level and many others, please do not wait to enable us know, then we can recommend suited motor for every your request appropriately.

Q: Do you have a custom-made provider for your common motors?
A: Yes, we can customise for each your ask for for the voltage, speed, torque and shaft size/condition. If you want added wires/cables soldered on the terminal or need to insert connectors, or capacitors or EMC we can make it also.

Q: Do you have an person layout provider for motors?
A: Of course, we would like to style motors independently for our buyers, but it could want some mould creating expense and design charge.

Q: What is your direct time?
A: Generally speaking, our regular regular item will need fifteen-30days, a little bit more time for tailored products. But we are very adaptable on the guide time, it will depend on the certain orders.

Remember to contact us if you have in depth requests, thank you !

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Three-Step

###

Customization:	Available \|

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Three-Step

###

Customization:	Available \|

Planetary Gearbox Advantages and Disadvantages

Suitable for counterclockwise and clockwise rotation

Has less inertia

Offers greater reliability

Has higher operating speeds

Has drawbacks

China Three-Step 115 mm transmission fast gear box Small Spur Precision Planetary Gearbox planetary gearbox clutch
editor by CX 2023-04-07

China RV110 Worm Gear Speed Reducer Transmission Gear Reduction Worm Gearbox efficiency of planetary gearbox

Warranty: 3 several years
Relevant Industries: Production Plant, Machinery Restore Shops
Excess weight (KG): 9 KG
Personalized support: OEM
Gearing Arrangement: Worm, Planetary
Output Torque: 15Nm-500Nm
Enter Pace: Max6000RPM
Output Velocity: According to motor
Item Identify: RV110 Worm Equipment Speed Reducer Transmission Gear Reduction Worm Gearbox
Brand name: NTL
Application: CNC
Entire Load Performance: ninety%-98%
Running Temperature: -25°C- Skype:AmyChen3190 Whatsapp: Wechat:1378719571

Benefits of a Planetary Gearbox With Output Shaft

The output shaft of a Planetary Gearbox connects to the driven wheels, while the input shaft comes from the engine. These gears are interlinked and create a wide range of gear reductions, which are necessary to get a vehicle rolling comfortably. Gear reductions are the place where the various “gears” are located. Here are some examples. They can help you determine what you need for your vehicle. You might also want to learn about planetary gears.
planetarygearbox

Planetary gearboxes

Modern cars are most likely equipped with planetary gearboxes. If you’re unsure if your vehicle uses planetary gears, you should first consult your car’s owner’s manual. If not, contact your dealership’s service department for more information. Otherwise, you can do a quick search on the internet to find out whether your car has a planetary gearbox. These gearboxes are generally more complex than ordinary gears. Additionally, they are equipped with more parts and require lubrication.
In addition to their low noise levels, planetary gearboxes are also remarkably efficient at transmission. These features make them ideal for applications requiring high torque and small footprints. Unfortunately, there are many different types of planetary gearboxes on the market, making it difficult to find the right one. The following article will give you some guidelines to help you choose the right planetary gearbox for your needs. Let’s take a look!

Planetary gears

A planetary gearbox has two main components: the sun gear (also known as the central or input) and the planet gears (also known as outer or peripheral). These gears are connected together by a carrier to the output shaft of the machine. In some applications, it is necessary to use a planetary gearbox with lubrication to prevent wear and tear. A planetary gearbox also has a small ring gear that helps hold the planet gears together.
The main advantage of a planetary gearbox is that it uses several teeth that engage at once, allowing for high-speed reduction with a small number of gears. Because the gears are relatively small, they have lower inertia than their larger counterparts. Planetary gearboxes are compact, which makes them popular for space-constrained applications. Because of their compact size and efficiency, planetary gearboxes are also commonly used in motor vehicles.

Planetary gearboxes with output shaft

For high-speed, dynamic applications, planetary gearbox units with output shaft provide the optimal solution. Thanks to their low inertia, these gearheads deliver superior performance in many industrial applications. Additionally, their wide range of variants allows users to select the perfect product for their application. This article examines some of the key benefits of planetary gearboxes with output shaft. Read on to learn more.
The planetary gearbox has two major components: a sun gear and planet gears. The sun gear is usually the input gear, while the planet gears are located at the outer edges of the system casing. Planet gears are held together by a carrier that is connected to the output shaft. Before choosing a particular gearbox for your application, make sure that you check the specific requirements and the environment to which the unit will be subjected.
A planetary gearbox has less stages of gears, and thus lower backlash compared to spur gearboxes. Backlash is lost motion that occurs when the teeth of the gears are out of perfect alignment. This problem is common in all gears, but is significantly less in planetary gearboxes. As such, planetary gearboxes are more efficient. They can also be customized according to the specific engine model and motor flange.
planetarygearbox

Planetary gearboxes with carrier

A planetary gearbox is a type of gearbox with three or more stages. They have a sun gear, which is usually the input gear, and planet gears, also called the outer gears. The carrier that connects the planet gears to the output shaft is called a ring gear. A planetary gearbox is generally designed to meet specific application and environmental requirements, but there are some factors to consider when choosing one.
The compact footprint of planetary gear sets results in high heat dissipation. This can be a problem in applications with sustained performance or high speeds. As a result, planetary gear sets often include lubricants, which present a cooling effect while also reducing noise and vibration. Some planetary gears even feature a carrier to make the installation process easier. Here are some things to keep in mind when choosing a planetary gear set.
Planetary gearboxes with carrier have several advantages over other types of gearboxes. Unlike conventional gearboxes, planetary gears have a common central shaft, and the tangential forces between the gears cancel out at the center of the ring gear. Because of this, planetary gearboxes are commonly used in input/output applications, and their compact size allows for a wide range of gear reductions. These gears can also produce higher torque density.

Planetary gearboxes with traction

Planetary gears are similar to the planetary system, in that each pinion rotates around a sun gear. The output of the planetary gear unit is lower than the drive rotation speed, but the torque is higher. As the number of planet gear wheels increases, so does the torque. Planetary gear systems contain three to four planet gears, and each is in constant mesh with the others. Power applied to any one member rotates the entire assembly.
Typical applications for planetary gear sets include high-precision motion control. In these applications, high torque, torsional stiffness, and low backlash are required. Planetary gear sets are also ideal for motors with higher speeds. A number of factors contribute to the reliability of these devices. The low backlash and large torque capacity of a planetary gear motor allow them to be used in a wide range of applications.

Planetary gearboxes with electric motors

If you’re in the market for a new gearbox, you may have already heard about planetary gearboxes. The planetary gearbox is a high-efficiency, low-noise gearbox. CZPT manufactures high-torque planetary gearboxes with low backlash. They also make economy planetary gearboxes for lower loads. However, with so many different types available, choosing the right one for your needs can be challenging.
These planetary gearboxes are a compact alternative to conventional pinion-and-gear reducers. They offer high-speed reduction and high torque transfer, and are often used for space-constrained applications. But before you can understand how they work, you’ll need to understand a little about their construction. There are a few things to look for that you may not have noticed before.
The most common type of planetary gearbox is a PM81/LN. It features a set of DC brush motors with diameter 77mm, a stator, and two or more outer gears. Each of these gears is connected to an output shaft through a carrier. They can also be used with brakes, encoders, or a clutch. A planetary gearbox is one of the most reliable gearbox types on the market.

Planetary gearboxes with hydraulic motors

A planetary gearbox is a combination of two gears, the sun and the planets. The sun gear rotates at high speed, while the planets roll around and orbit around the ring gear. The output shaft has the same direction of rotation as the input shaft. The benefits of a planetary gearbox include high reduction ratios, efficiency, space-saving compactness, and higher overload capacity. These gears are also more stable and compact, and they do not suffer from self-locking properties.
Planetary gearboxes are a highly efficient way to power hydraulic lifts. They can be input via electric, hydraulic, or air motors. The drive arrangement can be mounted on a bare shaft, splined shaft, or a parallel keyed input shaft. Depending on the application, bespoke gearboxes can be manufactured with a variety of features and functions.
planetarygearbox

Planetary gearboxes with combustion engines

There are many different applications of planetary gear sets. The most common is the distribution of power between two wheels in a car’s drive axle. Four-wheel drives use two axle differentials, which are further augmented by a centre differential. Hybrid electric vehicles use summation gearboxes to distribute power from the combustion engine to the wheels and to an electric motor. Planetary gear sets also combine the two different types of motors to form one hybrid vehicle.
To understand how planetary gear sets work, it is important to understand the underlying mechanical principles. For example, Fig. 4.6 shows a stick diagram illustrating two planetary gear sets connected by a lever. The two levers are the same length, so the system is analogous to a single lever. When calculating the torque, it is essential to consider the lever diagram. Similarly, if two gear sets are connected by vertical links, the horizontal links must be horizontal.

China RV110 Worm Gear Speed Reducer Transmission Gear Reduction Worm Gearbox efficiency of planetary gearbox
editor by czh 2023-02-15

China Transmission Geared Motor Unit RV Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox manufacturer

Merchandise Description

Worm gearbox pace reducer electric motor dc are on sale with high top quality for you

SMRV 571-one hundred fifty worm equipment box with flange and electric motor
SMRV+NMRV Double Phase Arrangement Reduction Gear Box
RV Series Worm Gearbox
worm speed reducer
nmrv worm equipment motor

You can select the 1 type that you need kind these solution introction.
If you have any issue,please speak to me.
HangZhou Sihai Machinery Co.,ltd is a company specialized in research, manufacture and provider of speed gearbox. Ever since institution, we have been persisting in technical innovation, advancing the techonology to our items even though maintaining our rigid quality controls. It is the purpose that our merchandise branding ”Xihu (West Lake) Dis.n” have enjoyed this sort of successful global revenue.
At existing, our business mostly supplies 5 collection items as RV worm gearbox, UDL collection velocity variator,Computer sequence helical equipment device,G3 helical geared motor and SRC helical gearbox. The items are widely utilized in the mechanical products area this sort of as food and beverage,cement,package,chemical and dyeing, rubber and plastic, CNC equipment tool,and so forth.
Our items have been processed ISO 9001 Good quality System Certification and exported to Italy,Spain,Britain,Poland,Turkey.The United states of america and other European countries,make the good track record with our excellent high quality and support.
Clients 1st,buyers satisfaction, outstanding following sale support and incessant innovation are our tenet and motto. We will go all out to provide all the clients with substantial good quality and support.

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Conical – Cylindrical Gear
Step:	Single-Step

###

Customization:	Available \| Customized Request

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Conical – Cylindrical Gear
Step:	Single-Step

###

Customization:	Available \| Customized Request

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China Transmission Geared Motor Unit RV Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox manufacturer
editor by czh 2023-01-29

China Cycloidal Modern Spur Gear marine rotary tiller transmission fast box Precision Planetary Gearbox planetary gearbox dc motor

Solution Description

Comprehensive Photographs

Solution Parameters

Note : It’s just the common technological information for you reference, The specification these kinds of as voltage, velocity, torque, shaft can be custom-made by your wants. Please contact us for a lot more particulars. Many thanks.

Firm Profile

FAQ

Q: What’re your primary goods?

A: We currently produce Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for over motors on our internet site and you can email us to recommend necessary motors for every your specification also.

Q: How to choose a suited motor?
A:If you have motor images or drawings to show us, or you have thorough specs like voltage, velocity, torque, motor dimension, doing work manner of the motor, needed life span and noise amount etc, you should do not wait to permit us know, then we can recommend suitable motor for each your request accordingly.

Q: Do you have a tailored support for your common motors?
A: Of course, we can customise for each your request for the voltage, pace, torque and shaft dimensions/condition. If you need to have added wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it also.

Q: Do you have an person design support for motors?
A: Of course, we would like to design and style motors separately for our consumers, but it may need to have some mould building price and layout charge.

Q: What is your lead time?
A: Usually talking, our regular normal product will need fifteen-30days, a bit more time for personalized goods. But we are quite adaptable on the direct time, it will count on the particular orders.

Make sure you speak to us if you have thorough requests, thank you !

US $230-400
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Three-Step

###

Customization:	Available \| Customized Request

US $230-400
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Three-Step

###

Customization:	Available \| Customized Request

Planetary Gearbox Advantages and Disadvantages

Suitable for counterclockwise and clockwise rotation

Has less inertia

Offers greater reliability

Has higher operating speeds

Has drawbacks

China Cycloidal Modern Spur Gear marine rotary tiller transmission fast box Precision Planetary Gearbox planetary gearbox dc motor
editor by czh 2023-01-23

China Straight Gears Transmission Part Marine Gearbox Planetary Gear Box planetary gearbox advantages

Solution Description

PRL80 collection Straight Gears Transmission Part Maritime Gearbox Planetary Equipment Box

Planetary gearbox is a variety of reducer with broad flexibility. The interior equipment adopts minimal carbon alloy metal carburizing quenching and grinding or nitriding process. Planetary gearbox has the attributes of tiny structure measurement, huge output torque, high velocity ratio, large effectiveness, protected and trustworthy efficiency, and so forth. The interior equipment of the planetary gearbox can be divided into spur equipment and helical gear. Clients can decide on the proper precision reducer in accordance to the needs of the software.

Merchandise Parameters

Qualities:
one.Output threaded link, common set up,universal usage.
2.One cantilever construction.basic design and style,financial price tag
three.Operating regular. Lower sounds.
four.Backlash 8-16 arcmin. Can suit most event
5.Keyway can be opened in the drive shaft.
six.Round flange shaft output,threaded reverse relationship,standardized size.
7.Straight gear transmission,large precision,higher torque
8.Velocity ratio range:3-one hundred
nine.Precision variety:8-16arcmin
ten.Size variety:forty-160mm

Specifications				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Technal Parameters				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Max. Torque			Nm	1.5times rated torque
Emergency End Torque			Nm	2.5times rated torque
Max. Radial Load			N	185	240	four hundred	450	1240	2250
Max. Axial Load			N	one hundred fifty	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	.seven	one.8	4.seven	four.85	11	35
Max.Input Pace			rpm	8000	8000	6000	6000	6000	4000
Rated Enter Velocity			rpm	4500	4000	3500	3500	3500	3000
Noise			dB	≤55	≤58	≤60	≤60	≤65	≤70
Average Existence Time			h	20000
Efficiency Of Complete Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20	≤20
Instant Of Inertia Table	L1	3	Kg*cm2	.1	.46	.77	1.73	twelve.78	36.seventy two
		four	Kg*cm2	.1	.46	.seventy seven	1.73	12.78	36.72
		5	Kg*cm2	.1	.46	.77	one.seventy three	12.seventy eight	36.72
		7	Kg*cm2	.06	.41	.sixty five	one.forty two	11.38	34.02
		ten	Kg*cm2	.06	.41	.65	one.forty two	11.38	34.02
	L2	12	Kg*cm2	.08	.44	.seventy two	1.forty nine	12.eighteen	34.24
		15	Kg*cm2	.08	.forty four	.72	one.forty nine	12.18	34.24
		sixteen	Kg*cm2	.08	.forty four	.72	1.49	twelve.18	34.24
		20	Kg*cm2	.08	.forty four	.72	1.forty nine	twelve.18	34.24
		twenty five	Kg*cm2	.08	.44	.72	one.forty nine	twelve.18	34.24
		28	Kg*cm2	.08	.forty four	.seventy two	one.49	12.eighteen	34.24
		30	Kg*cm2	.08	.forty four	.72	one.49	twelve.eighteen	34.24
		35	Kg*cm2	.08	.forty four	.seventy two	1.49	12.eighteen	34.24
		forty	Kg*cm2	.08	.44	.72	1.forty nine	twelve.eighteen	34.24
		fifty	Kg*cm2	.05	.34	.58	one.twenty five	eleven.forty eight	34.02
		70	Kg*cm2	.05	.34	.58	one.twenty five	eleven.48	34.02
		a hundred	Kg*cm2	.05	.34	.58	1.25	11.48	34.02
Technological Parameter	Amount	Ratio		PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Rated Torque	L1	3	Nm	/	27	fifty	ninety six	161	384
		four	Nm	16	forty	ninety	122	210	423
		five	Nm	fifteen	forty	90	122	210	423
		7	Nm	12	34	forty eight	ninety five	a hundred and seventy	358
		ten	Nm	ten	16	22	fifty six	86	210
	L2	12	Nm	/	27	fifty	ninety five	161	364
		fifteen	Nm	/	27	50	96	161	364
		sixteen	Nm	16	40	90	122	210	423
		twenty	Nm	16	40	ninety	122	210	423
		25	Nm	15	40	90	122	210	423
		28	Nm	16	40	90	122	210	423
		thirty	Nm	/	27	fifty	ninety six	161	364
		35	Nm	twelve	forty	90	122	210	423
		40	Nm	16	40	ninety	122	210	423
		50	Nm	15	40	ninety	122	210	423
		70	Nm	twelve	34	48	95	170	358
		one hundred	Nm	10	16	22	ninety six	80	210
Degree Of Safety				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	.43	.95	2.27	three.06	6.93	fifteen.5
Weight	L2		kg	.65	one.2	two.8	3.86	8.ninety eight	seventeen

Firm Profile

Packaging & Shipping and delivery

Application:	Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery
Function:	Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

###

Samples:	US$ 137/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Technal Parameters				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	185	240	400	450	1240	2250
Max. Axial Load			N	150	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	0.7	1.8	4.7	4.85	11	35
Max.Input Speed			rpm	8000	8000	6000	6000	6000	4000
Rated Input Speed			rpm	4500	4000	3500	3500	3500	3000
Noise			dB	≤55	≤58	≤60	≤60	≤65	≤70
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		4	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		5	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		7	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
		10	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
	L2	12	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		15	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		16	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		20	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		25	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		28	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		30	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		35	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		40	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		50	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		70	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		100	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
Technical Parameter	Level	Ratio		PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Rated Torque	L1	3	Nm	/	27	50	96	161	384
		4	Nm	16	40	90	122	210	423
		5	Nm	15	40	90	122	210	423
		7	Nm	12	34	48	95	170	358
		10	Nm	10	16	22	56	86	210
	L2	12	Nm	/	27	50	95	161	364
		15	Nm	/	27	50	96	161	364
		16	Nm	16	40	90	122	210	423
		20	Nm	16	40	90	122	210	423
		25	Nm	15	40	90	122	210	423
		28	Nm	16	40	90	122	210	423
		30	Nm	/	27	50	96	161	364
		35	Nm	12	40	90	122	210	423
		40	Nm	16	40	90	122	210	423
		50	Nm	15	40	90	122	210	423
		70	Nm	12	34	48	95	170	358
		100	Nm	10	16	22	96	80	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.43	0.95	2.27	3.06	6.93	15.5
Weight	L2		kg	0.65	1.2	2.8	3.86	8.98	17

Application:	Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery
Function:	Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

###

Samples:	US$ 137/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Technal Parameters				PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	185	240	400	450	1240	2250
Max. Axial Load			N	150	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	0.7	1.8	4.7	4.85	11	35
Max.Input Speed			rpm	8000	8000	6000	6000	6000	4000
Rated Input Speed			rpm	4500	4000	3500	3500	3500	3000
Noise			dB	≤55	≤58	≤60	≤60	≤65	≤70
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		4	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		5	Kg*cm2	0.1	0.46	0.77	1.73	12.78	36.72
		7	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
		10	Kg*cm2	0.06	0.41	0.65	1.42	11.38	34.02
	L2	12	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		15	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		16	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		20	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		25	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		28	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		30	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		35	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		40	Kg*cm2	0.08	0.44	0.72	1.49	12.18	34.24
		50	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		70	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
		100	Kg*cm2	0.05	0.34	0.58	1.25	11.48	34.02
Technical Parameter	Level	Ratio		PRL40	PRL60	PRL80	PRL90	PRL120	PRL160
Rated Torque	L1	3	Nm	/	27	50	96	161	384
		4	Nm	16	40	90	122	210	423
		5	Nm	15	40	90	122	210	423
		7	Nm	12	34	48	95	170	358
		10	Nm	10	16	22	56	86	210
	L2	12	Nm	/	27	50	95	161	364
		15	Nm	/	27	50	96	161	364
		16	Nm	16	40	90	122	210	423
		20	Nm	16	40	90	122	210	423
		25	Nm	15	40	90	122	210	423
		28	Nm	16	40	90	122	210	423
		30	Nm	/	27	50	96	161	364
		35	Nm	12	40	90	122	210	423
		40	Nm	16	40	90	122	210	423
		50	Nm	15	40	90	122	210	423
		70	Nm	12	34	48	95	170	358
		100	Nm	10	16	22	96	80	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.43	0.95	2.27	3.06	6.93	15.5
Weight	L2		kg	0.65	1.2	2.8	3.86	8.98	17

Planetary Gearbox

planetary gearboxes

Their design

Applications

Maintenance

China Straight Gears Transmission Part Marine Gearbox Planetary Gear Box planetary gearbox advantages
editor by czh 2023-01-08

China Hot Sales Ratio 3-100 Helical Transmission Planetary Gear Boxes efficiency of planetary gearbox

Product Description

Hot Sales Ratio 3-a hundred Helical Transmission Planetary Gear packing containers

Nickel chromium molybdenum allpy steel equipment is manufacturered with carburizing warmth therapy for high abrasion resistance and impact toughness and by honing procedure to enhance gear prcision and lower noise operation.

Merchandise Description

Goods fearures:
one.One particular-piece design, Substantial Prescision and huge output torque
2.Double bracing cage planetary shelf composition , substantial relible. Can go well with reversible rotabtion usually
three.Helical gear transmission, a lot more reliable. Higher torque
4.Minimal return backlash,high precision
five.Special Rotation frame construction, can have bigger Radial&Axial load

Product Parameters

Specifications				PX42	PX60	PX90	PX120	PX140	PX180
Technal Parameters				PX42	PX60	PX90	PX120	PX140	PX180
Max. Torque			Nm	1.5times rated torque
Emergency Quit Torque			Nm	2.5times rated torque
Max. Radial Load			N	780	1530	3250	6700	9400	14500
Max. Axial Load			N	390	630	1300	3000	4700	7250
Torsional Rigidity			Nm/arcmin	two.five	six	12	23	47	130
Max.Input Velocity			rpm	8000	8000	8000	8000	6000	6000
Rated Enter Velocity			rpm	4000	4000	3000	3000	3000	3000
Noise			dB	≤56	≤58	≤60	≤65	≤68	≤68
Average Lifestyle Time			h	20000
Efficiency Of Entire Load			%	L1≥95% L2≥90%
Return Backlash	P1	L1	arcmin	/	≤3	≤3	≤3	≤3	≤3
	P1	L2	arcmin	/	≤5	≤5	≤5	≤5	≤5
	P2	L1	arcmin	≤5	≤5	≤5	≤5	≤5	≤5
	P2	L2	arcmin	≤7	≤7	≤7	≤7	≤7	≤7
Moment Of Inertia Table	L1	3	Kg*cm2	/	.16	.sixty one	3.25	nine.21	28.98
		four	Kg*cm2	.03	.fourteen	.48	2.74	7.54	23.sixty seven
		5	Kg*cm2	.03	.thirteen	.forty seven	2.71	seven.forty two	23.29
		seven	Kg*cm2	.03	.thirteen	.45	2.sixty two	7.14	22.forty eight
		eight	Kg*cm2	.03	.thirteen	.forty five	2.6	/	/
		10	Kg*cm2	.03	.thirteen	.four	two.57	seven.03	22.51
	L2	twelve	Kg*cm2	/	.thirteen	.45	.forty five	2.sixty three	7.3
		15	Kg*cm2	/	.13	.forty five	.45	2.63	seven.three
		20	Kg*cm2	.03	.13	.45	.forty five	two.sixty three	seven.three
		25	Kg*cm2	.03	.13	.45	.4	two.63	7.three
		28	Kg*cm2	.03	.thirteen	.45	.forty five	two.forty three	seven.one
		thirty	Kg*cm2	/	.thirteen	.45	.forty five	two.43	6.92
		35	Kg*cm2	.03	.13	.4	.four	2.forty three	seven.1
		forty	Kg*cm2	.03	.13	.forty five	.45	two.forty three	six.ninety two
		50	Kg*cm2	.03	.thirteen	.4	.4	two.39	six.ninety two
		70	Kg*cm2	.03	.13	.4	.4	two.39	six.seventy two
		a hundred	Kg*cm2	.03	.thirteen	.four	.4	2.39	six.72
Complex Parameter	Level	Ratio		PX42	PX60	PX90	PX120	PX140	PX180
Rated Torque	L1	3	Nm	/	40	one hundred and five	165	360	880
		4	Nm	seventeen	45	130	230	480	880
		5	Nm	15	45	130	230	480	1100
		7	Nm	twelve	forty five	a hundred	220	480	1100
		8	Nm	/	forty	90	200	/	/
		ten	Nm	ten	30	seventy five	one hundred seventy five	360	770
	L2	12	Nm	/	forty	one hundred and five	165	440	880
		fifteen	Nm	/	forty	one zero five	165	360	880
		twenty	Nm	seventeen	forty five	130	230	480	880
		25	Nm	15	forty five	130	230	480	880
		28	Nm	seventeen	45	one hundred thirty	230	480	1100
		thirty	Nm	/	forty	one zero five	a hundred sixty five	480	1100
		35	Nm	ten	thirty	a hundred thirty	230	480	1100
		40	Nm	17	45	130	230	480	1100
		50	Nm	15	forty five	a hundred thirty	230	480	1100
		70	Nm	12	forty five	a hundred	220	480	1100
		a hundred	Nm	10	30	seventy five	one hundred seventy five	360	770
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	.five	one.25	3.75	eight.five	sixteen	28.5
Weight	L2		kg	.eight	one.seventy five	five.one	twelve	21.5	40

Company Profile

Packaging & Transport

lead time	ten-15 working times as common,30days in busy season,it will dependent on the detailed get amount
Shipping and delivery of samples	by DHL,Fedex,UPS,TNT,EMS

Application:	Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator Machinery
Function:	Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

###

Samples:	US$ 689/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PX42	PX60	PX90	PX120	PX140	PX180
Technal Parameters				PX42	PX60	PX90	PX120	PX140	PX180
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	780	1530	3250	6700	9400	14500
Max. Axial Load			N	390	630	1300	3000	4700	7250
Torsional Rigidity			Nm/arcmin	2.5	6	12	23	47	130
Max.Input Speed			rpm	8000	8000	8000	8000	6000	6000
Rated Input Speed			rpm	4000	4000	3000	3000	3000	3000
Noise			dB	≤56	≤58	≤60	≤65	≤68	≤68
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥90%
Return Backlash	P1	L1	arcmin	/	≤3	≤3	≤3	≤3	≤3
	P1	L2	arcmin	/	≤5	≤5	≤5	≤5	≤5
	P2	L1	arcmin	≤5	≤5	≤5	≤5	≤5	≤5
	P2	L2	arcmin	≤7	≤7	≤7	≤7	≤7	≤7
Moment Of Inertia Table	L1	3	Kg*cm2	/	0.16	0.61	3.25	9.21	28.98
		4	Kg*cm2	0.03	0.14	0.48	2.74	7.54	23.67
		5	Kg*cm2	0.03	0.13	0.47	2.71	7.42	23.29
		7	Kg*cm2	0.03	0.13	0.45	2.62	7.14	22.48
		8	Kg*cm2	0.03	0.13	0.45	2.6	/	/
		10	Kg*cm2	0.03	0.13	0.4	2.57	7.03	22.51
	L2	12	Kg*cm2	/	0.13	0.45	0.45	2.63	7.3
		15	Kg*cm2	/	0.13	0.45	0.45	2.63	7.3
		20	Kg*cm2	0.03	0.13	0.45	0.45	2.63	7.3
		25	Kg*cm2	0.03	0.13	0.45	0.4	2.63	7.3
		28	Kg*cm2	0.03	0.13	0.45	0.45	2.43	7.1
		30	Kg*cm2	/	0.13	0.45	0.45	2.43	6.92
		35	Kg*cm2	0.03	0.13	0.4	0.4	2.43	7.1
		40	Kg*cm2	0.03	0.13	0.45	0.45	2.43	6.92
		50	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.92
		70	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.72
		100	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.72
Technical Parameter	Level	Ratio		PX42	PX60	PX90	PX120	PX140	PX180
Rated Torque	L1	3	Nm	/	40	105	165	360	880
		4	Nm	17	45	130	230	480	880
		5	Nm	15	45	130	230	480	1100
		7	Nm	12	45	100	220	480	1100
		8	Nm	/	40	90	200	/	/
		10	Nm	10	30	75	175	360	770
	L2	12	Nm	/	40	105	165	440	880
		15	Nm	/	40	105	165	360	880
		20	Nm	17	45	130	230	480	880
		25	Nm	15	45	130	230	480	880
		28	Nm	17	45	130	230	480	1100
		30	Nm	/	40	105	165	480	1100
		35	Nm	10	30	130	230	480	1100
		40	Nm	17	45	130	230	480	1100
		50	Nm	15	45	130	230	480	1100
		70	Nm	12	45	100	220	480	1100
		100	Nm	10	30	75	175	360	770
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.5	1.25	3.75	8.5	16	28.5
Weight	L2		kg	0.8	1.75	5.1	12	21.5	40

###

lead time	10-15 working days as usual,30days in busy season,it will based on the detailed order quantity
Delivery of samples	by DHL,Fedex,UPS,TNT,EMS

Application:	Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator Machinery
Function:	Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

###

Samples:	US$ 689/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PX42	PX60	PX90	PX120	PX140	PX180
Technal Parameters				PX42	PX60	PX90	PX120	PX140	PX180
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	780	1530	3250	6700	9400	14500
Max. Axial Load			N	390	630	1300	3000	4700	7250
Torsional Rigidity			Nm/arcmin	2.5	6	12	23	47	130
Max.Input Speed			rpm	8000	8000	8000	8000	6000	6000
Rated Input Speed			rpm	4000	4000	3000	3000	3000	3000
Noise			dB	≤56	≤58	≤60	≤65	≤68	≤68
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥90%
Return Backlash	P1	L1	arcmin	/	≤3	≤3	≤3	≤3	≤3
	P1	L2	arcmin	/	≤5	≤5	≤5	≤5	≤5
	P2	L1	arcmin	≤5	≤5	≤5	≤5	≤5	≤5
	P2	L2	arcmin	≤7	≤7	≤7	≤7	≤7	≤7
Moment Of Inertia Table	L1	3	Kg*cm2	/	0.16	0.61	3.25	9.21	28.98
		4	Kg*cm2	0.03	0.14	0.48	2.74	7.54	23.67
		5	Kg*cm2	0.03	0.13	0.47	2.71	7.42	23.29
		7	Kg*cm2	0.03	0.13	0.45	2.62	7.14	22.48
		8	Kg*cm2	0.03	0.13	0.45	2.6	/	/
		10	Kg*cm2	0.03	0.13	0.4	2.57	7.03	22.51
	L2	12	Kg*cm2	/	0.13	0.45	0.45	2.63	7.3
		15	Kg*cm2	/	0.13	0.45	0.45	2.63	7.3
		20	Kg*cm2	0.03	0.13	0.45	0.45	2.63	7.3
		25	Kg*cm2	0.03	0.13	0.45	0.4	2.63	7.3
		28	Kg*cm2	0.03	0.13	0.45	0.45	2.43	7.1
		30	Kg*cm2	/	0.13	0.45	0.45	2.43	6.92
		35	Kg*cm2	0.03	0.13	0.4	0.4	2.43	7.1
		40	Kg*cm2	0.03	0.13	0.45	0.45	2.43	6.92
		50	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.92
		70	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.72
		100	Kg*cm2	0.03	0.13	0.4	0.4	2.39	6.72
Technical Parameter	Level	Ratio		PX42	PX60	PX90	PX120	PX140	PX180
Rated Torque	L1	3	Nm	/	40	105	165	360	880
		4	Nm	17	45	130	230	480	880
		5	Nm	15	45	130	230	480	1100
		7	Nm	12	45	100	220	480	1100
		8	Nm	/	40	90	200	/	/
		10	Nm	10	30	75	175	360	770
	L2	12	Nm	/	40	105	165	440	880
		15	Nm	/	40	105	165	360	880
		20	Nm	17	45	130	230	480	880
		25	Nm	15	45	130	230	480	880
		28	Nm	17	45	130	230	480	1100
		30	Nm	/	40	105	165	480	1100
		35	Nm	10	30	130	230	480	1100
		40	Nm	17	45	130	230	480	1100
		50	Nm	15	45	130	230	480	1100
		70	Nm	12	45	100	220	480	1100
		100	Nm	10	30	75	175	360	770
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.5	1.25	3.75	8.5	16	28.5
Weight	L2		kg	0.8	1.75	5.1	12	21.5	40

###

lead time	10-15 working days as usual,30days in busy season,it will based on the detailed order quantity
Delivery of samples	by DHL,Fedex,UPS,TNT,EMS

How to Select a Planetary Gearbox for Your Applications

You can select the most suitable Planetary Gearbox for your applications after carefully checking the various features. You should also consider secondary features like noise level, corrosion resistance, construction, price, delivery time and service. You should also check if the constructor is available across the world, because some constructors operate faster than others. Some constructors even respond to your requests on the same day, while others deliver each planetary gearbox even if they are out of stock.
planetarygearbox

CZPT gearbox

An CZPT planetary gearbox is a high-quality, compact, and lightweight gearbox that distributes loads over several gears. The planetary gearbox has a polymer case that ensures quiet operation. The company is committed to the circular economy, investing in chemical recycling and promoting the use of recycled materials wherever possible. For more information, visit CZPT’s website or contact an CZPT expert today.
A planetary gearbox contains a sun gear, which is known as the input gear. The other gears are called planets, and these are mounted on a carrier, which is connected to an output shaft. A planetary gearbox is characterized by its high reduction ratios, energy savings, and compact design. It offers superior durability and trouble-free service. Whether you need a large or small planetary gearbox, you can find one to suit your needs.
The Standard series planetary gearboxes are a cost-effective alternative to premium series gearboxes. These gearboxes are suitable for applications requiring only mild backlash or with low IP65 protection. ABB positioners feature seven different gear unit variants, allowing for standardized mounting and stranded wire connections. The drygear(r) strain wave gear has a stranded wire connector and is available with a three-year warranty.
A planetary gearbox can be used for various applications, from lifting goods to loading and unloading products in a factory. The company has a wide product range for different applications, including plastic machinery and machine tools, pick-and-place robots, mill drives, and wind turbines. It can also be used to operate robot gripper systems. Its high-quality planetary gears are designed to last for many years, making it an ideal solution for many industries.

CZPT

A planetary gearbox is an essential component of many transport systems. These devices work by aligning the output and input shafts. The Reggiana planetary gearbox 2000 series includes bevel stages and linear variants. The company offers modularity and flexibility with output configurations in ten different gear sizes. Each planetary gearbox can also be customized to meet the specific needs of a specific application.
CZPT is the Australian branch of CZPT, a leading global manufacturer of planetary gearboxes. CZPT is located in Carrum Downs, south east of Melbourne, and is one of the leading suppliers of planetary reduction gears, hydraulic failsafe brakes, and wheel drives. The company aims to provide high-quality, durable products that can be used in a variety of applications.
A CZPT Plus Series Gear is designed to maximize flexibility in a variety of applications. The gearbox’s modular design allows for endless scalability. The CZPT Plus Series Gear is commonly used in mining operations, and is known for its raw output capabilities and low maintenance design. It is made with high-quality materials, and it is also available in multiple sizes for customized applications.
The multi-stage planetary gearbox can combine individual ratios to increase the overall multiplicative factor. The planetary gears may also be combined to increase the transmittable torque. The output shaft and drive shaft may rotate in opposite directions, or they can be fixed so the gearbox can function in either direction. If the ring gear is fixed, planetary gearboxes can be realized as multi-stage.
planetarygearbox

CZPT

The CZPT Planetary Gearbox is the perfect combination of compact size and high efficiency in power transmission. The compact design allows this gearbox to run silently while still delivering high power density and transmission efficiency. The CZPT Planetary Gearbox has several advantages. Unlike conventional planetary gearboxes, CZPT’s planetary gearbox features high power density, low torque, and optimum transmission efficiency.
CZPT’s products have been used in a variety of applications for many years, proving their reliability and quality. These products are renowned in the world for their reliability and quality. CZPT’s planetary gearboxes are backed by a five-year warranty. These features help customers choose a planetary gearbox that meets their needs and stays in top shape for years to come. But how do you test a planetary gearbox?
Figure 17 shows the response of a planetary gearbox to vibration. The maximum displacement in xg direction at a 50% crack level is shown by the dashed line. The signal in xg direction is called the xsignal. Moreover, the CZPT Planetary Gearbox’s vibration response is highly sensitive to the location of the bearings. For this reason, dynamic modeling of a planetary gearbox should consider bearing clearance.
CZPT’s hollow cup motor drive system features high reliability and low power consumption. The gearbox is compatible with industries with high quality standards, as there is no cogging torque. Its compact size and low electromagnetic noise make it ideal for a variety of applications. For industries with high product quality requirements, the CZPT Hollow Cup Motor Drive System is an excellent choice. It is also designed for vertical installation. You can even buy multiple CZPT products to meet your specific needs.

CZPT

With its PL series planetary gearboxes, CZPT has expanded its product portfolio to include more types of drive solutions. CZPT is one of the few companies to have won the Schneider Electric Supplier Award for Quality. In addition, its high-quality planetary gearboxes are highly customizable, allowing designers to customize each gearbox for the application at hand. Whether it is a geared pump or a stepper motor, CZPT’s PLE planetary gearboxes are built to meet the exact specifications of the application at hand.
The flange-mounted version of the planetary gearbox is comparable to its planetary counterpart. Using a flange-mounted planetary gearbox allows for a smaller, more compact design. This model also features a large-diameter output shaft, which helps achieve a higher level of torsional stiffness. This makes CZPT flange gearboxes particularly useful for applications where the direction of motion can change frequently. These gearboxes can be used with a wide variety of belts.
The PLQE 60-mm gearbox is used in Outrider’s single-stage design. Its gear ratio is 5:1, while its dual-stage version has a 15:1 gear ratio. Both gearboxes have identical mounting configurations, but the two-stage version is slightly longer.
The PLN series of planetary gearheads from CZPT are the standard for high-precision applications. They’re compatible with all major motor brands and sizes, and the company’s adapter kits are available to fit almost any motor. This makes CZPT gearheads one of the easiest to integrate into a complex machine. They’re also extremely easy to install, with the same torque as their corresponding spur gears.
planetarygearbox

CZPT’s

If you are looking for an efficient solution for screw press applications, consider using CZPT’s 300M Planetary Gearbox. It has high axial and radial load capacities, compact design, high torque output, and torque arm. The 300M planetary gearbox is compatible with a variety of screw presses, including hydraulic press systems and digester systems. Its Torque control and direct coupling feature makes it easy to install.
CZPT’s small planetary gearboxes have an output torque of 20:1 from individual ratios of 5:1 and 4:1. They run silently and deliver maximum transmission efficiency. The planetary gears are mounted on a ring that is fixed around the center sun gear. The ring acts as an output torque converter for the next planet stage. This planetary gearbox has multiple stages and a maximum ratio of 20:1 can be created from individual ratios of 5:1 and 4:1.
CZPT Motor is an innovator in the design and manufacture of miniature motors for industrial robots. Its offerings include brushless DC and brushed DC motors, as well as planetary gearboxes, encoders, and brakes. CZPT’s products have a variety of uses in robotics, intelligent appliances, medical equipment, communication, and industrial automation. The company is also committed to providing custom designs based on customer specifications.
Another advantage of a planetary gearbox is its high power transmission efficiency. It is capable of approximately 3% per stage, allowing it to transmit more torque than a conventional single-stage gearbox. Planetary gearboxes are also compact and have a high torque-to-weight ratio. CZPT’s Planetary Gearbox is the best choice for many applications. This gearbox offers the highest efficiency and is ideal for small-scale production.

China Hot Sales Ratio 3-100 Helical Transmission Planetary Gear Boxes efficiency of planetary gearbox
editor by czh 2023-01-07

in Mosul Iraq sales price shop near me near me shop factory supplier High Precision Customized Transmission Gear Ring manufacturer best Cost Custom Cheap wholesaler

With EPG brand registered in much more than 70 international locations like America , Europe , Japan and so on, it has associates amongst planet best enterprises, this sort of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so on. Excellent attention has been compensated on environmental safety and vitality conserving. High quality and credit history are the bases that make a corporation alive.

EPT EPT EPTT EPTT EPT Ring

1. Description

No.	Product	Description
one	Title	Exterior EPT Ring
2	Size	EPT can be EPT.
3	Manufacture StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd	five-eight Quality ISO1328-1997.
four	EPT	forty five#Metal,20CrMnTi,40Cr,20CrNiMo,20MnCr5,GCR15SiMn,42CrMo,2Cr13stainless metal,Nylon,Bakelite,Copper,Aluminium.and so on
five	Manufacturing Process	The main approach is EPT Hobbing and EPT EPT, Picking production process according to the different goods.
6	Warmth Treatment	Carburizing and quenching ,EPT-frequency quenching,Nitriding, Hardening and tempering, Deciding on warmth treatment method in accordance to the diverse supplies.
7	Screening EPT	Rockwell hardness tester 500RA, EPTT mesh instrument EPTT-200B amp 3102,EPT measurement cEPTTr instrument CNC3906T and other EPT precision detection equipments
eight	Certification	GB/T19001-2016/ISO9001:2015
9	Use	Employed in printing EPTT, cleansing EPTT, healthcare equipment, XiHu (West EPT) Dis.Hu (West EPT) Dis.den EPTT, building EPTT, electric powered auto, valve, forklift, transportation gear and a variety of EPT EPTTs.and many others
10	Deal	In accordance to customer’s request

2. Photos

three. OrEPTTprocess
a. Customer sends us the drawing or sample, If only sample, our organization offer the CAD drawing.
b. Our firm materials the processing strategy and quotation.
c. Our company materials the sample right after consumer verified processing approach and quotation.
d. Customer areas the orEPTTafter validate the sample.
e. Customer pay out 50% deposit
f. EPTtity production.
g. Spend the balance after the acceptance and confirmation.
h. Delivery.

in Mosul Iraq sales price shop near me near me shop factory supplier High Precision Customized Transmission Gear Ring manufacturer best Cost Custom Cheap wholesaler

in Ciudad Juarez Mexico sales price shop near me near me shop factory supplier Inline Transmission Planetary Gearbox Gear Unit for Mixer manufacturer best Cost Custom Cheap wholesaler

we have attained the have confidence in of customers throughout the world. Our products are utilized in a lot of fields. Our firm pays distinct attention to customers’ wants, listening to the specific specifications of every single client and guaranteeing complete gratification. Inline EPTT Planetary EPTT EPT Device For Mixer

Attribute of Brevini Planetary EPT EPTT :

one. The broad and extensive range of N collection for EPTT programs
2. Minimal-pace shaft design and style: Cylindrical with key, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and precise nodular forged iron casing
4. Lower noise working, large production quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd
5. EPT and dependable functionality, load capability and minimal-velocity shaft bearing

Info Sheet :

Torque assortment	a thousand … 540000 Nm	Enter	IEC Flange
EPT score (n1 = 1500 min-1)	up to 200kW		Electric powered motor
EPT ratios	three.fifteen … 5000		Reliable enter shaft with or without fan cooling – inch or metric dims.
EPT unit versions	In line	Relevant AC motors	Integral motors and brake motors
EPT unit versions	RigEPTT angle (with EPTTl EPT established)		IEC-normalized motors and brake motors
Mounting kind	Foot		Single and dual pace motors
	Flange mounted	Major brake attributes	DC and AC offer
	Torque-arm	Major brake attributes	More quickly brake reaction by way of electronically controlled rectifier
Output shaft options	Sound shaft	Major motor possibilities	Thermistors and thermostat sensors
	Splined shaft		Independent forced cooling
	Female splined shaft		Line EPTr and push-pull incremental encoder
	Hollow shaft with shrink disc

in Ciudad Juarez Mexico sales price shop near me near me shop factory supplier Inline Transmission Planetary Gearbox Gear Unit for Mixer manufacturer best Cost Custom Cheap wholesaler