Tag Archives: high torque gearbox motor

China High Torque Low Backlash NEMA34 Motor Planetary Reducer Gearbox advantages of planetary gearbox

Product Description

Higher Torque Lower Backlash Nema34 Motor Planetary Reducer Gearbox

The substantial-precision planetary gearbox adopts spur equipment design, and is employed in numerous control transmission fields with servo motors, this sort of as precision machine equipment, laser slicing equipment, battery processing tools, and so on. It has the rewards of large torsional rigidity and big output torque.

Item Description

Item Parameters

1.Output threaded connection, common installation,universal utilization.
2.One cantilever construction.basic style,economic price tag
3.Working constant. Reduced noise.
four.Spherical flange output,threaded reverse link,standardized dimension.
5.Keyway can be opened in the force shaft.
6.The output link technical specs are total and there are many options
seven.Backlash 8-16 arcmin. Can fit most event.

Specifications				PRN60	PRN80	PRN90	PRN120	PRN160
Technal Parameters				PRN60	PRN80	PRN90	PRN120	PRN160
Max. Torque			Nm	1.5times rated torque
Emergency Quit Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	four hundred	450	1240	2250
Max. Axial Load			N	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	one.eight	four.seven	4.85	eleven	35
Max.Input Speed			rpm	8000	6000	6000	6000	4000
Rated Enter Velocity			rpm	4000	3500	3500	3500	3000
Noise			dB	≤58	≤60	≤60	≤65	≤70
Average Daily life Time			h	20000
Efficiency Of Total Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20
Minute Of Inertia Table	L1	3	Kg*cm2	.forty six	.77	1.seventy three	12.seventy eight	36.seventy two
		4	Kg*cm2	.46	.seventy seven	one.seventy three	12.seventy eight	36.seventy two
		five	Kg*cm2	.forty six	.seventy seven	one.73	12.78	36.72
		seven	Kg*cm2	.41	.sixty five	one.forty two	eleven.38	34.02
		10	Kg*cm2	.forty one	.65	1.42	eleven.38	34.02
	L2	twelve	Kg*cm2	.forty four	.seventy two	one.49	12.eighteen	34.24
		fifteen	Kg*cm2	.44	.72	one.forty nine	12.eighteen	34.24
		16	Kg*cm2	.72	.seventy two	1.49	12.18	34.24
		20	Kg*cm2	.forty four	.72	1.forty nine	12.eighteen	34.24
		twenty five	Kg*cm2	.44	.72	one.forty nine	12.18	34.24
		28	Kg*cm2	.forty four	.seventy two	1.49	12.18	34.24
		thirty	Kg*cm2	.forty four	.seventy two	1.forty nine	12.eighteen	34.24
		35	Kg*cm2	.forty four	.72	one.49	12.18	34.24
		40	Kg*cm2	.forty four	.seventy two	one.49	12.eighteen	34.24
		50	Kg*cm2	.34	.fifty eight	1.twenty five	eleven.48	34.02
		70	Kg*cm2	.34	.fifty eight	one.25	11.forty eight	34.02
		100	Kg*cm2	.34	.58	one.25	eleven.48	34.02
Technical Parameter	Degree	Ratio		PRN60	PRN80	PRN90	PRN120	PRN160
Rated Torque	L1	3	Nm	27	50	96	161	364
		four	Nm	40	90	122	210	423
		5	Nm	40	90	122	210	423
		seven	Nm	34	forty eight	ninety five	a hundred and seventy	358
		ten	Nm	16	22	fifty six	86	210
	L2	12	Nm	27	50	96	161	364
		15	Nm	27	fifty	ninety six	161	364
		sixteen	Nm	40	ninety	122	210	423
		twenty	Nm	forty	90	122	210	423
		twenty five	Nm	40	90	122	210	423
		28	Nm	forty	90	122	210	423
		30	Nm	27	50	96	161	364
		35	Nm	forty	ninety	122	210	423
		forty	Nm	40	90	122	210	423
		50	Nm	forty	ninety	122	210	423
		70	Nm	34	forty eight	95	one hundred seventy	358
		a hundred	Nm	16	22	56	86	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	.ninety five	two.27	3.06	6.ninety three	15.5
Weight	L2		kg	one.2	two.eight	3.86	8.98	seventeen

Organization Profile

Packaging & Delivery

1. Direct time: 10-15 days as typical, thirty days in active year, it will be dependent on the detailed order amount
2. Shipping and delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

Application:	Machine Tool
Speed:	Low Speed
Function:	Driving
Casing Protection:	Closed Type
Starting Mode:	Direct on-line Starting
Certification:	ISO9001

###

Samples:	US$ 105/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PRN60	PRN80	PRN90	PRN120	PRN160
Technal Parameters				PRN60	PRN80	PRN90	PRN120	PRN160
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	400	450	1240	2250
Max. Axial Load			N	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	1.8	4.7	4.85	11	35
Max.Input Speed			rpm	8000	6000	6000	6000	4000
Rated Input Speed			rpm	4000	3500	3500	3500	3000
Noise			dB	≤58	≤60	≤60	≤65	≤70
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		4	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		5	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		7	Kg*cm2	0.41	0.65	1.42	11.38	34.02
		10	Kg*cm2	0.41	0.65	1.42	11.38	34.02
	L2	12	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		15	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		16	Kg*cm2	0.72	0.72	1.49	12.18	34.24
		20	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		25	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		28	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		30	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		35	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		40	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		50	Kg*cm2	0.34	0.58	1.25	11.48	34.02
		70	Kg*cm2	0.34	0.58	1.25	11.48	34.02
		100	Kg*cm2	0.34	0.58	1.25	11.48	34.02
Technical Parameter	Level	Ratio		PRN60	PRN80	PRN90	PRN120	PRN160
Rated Torque	L1	3	Nm	27	50	96	161	364
		4	Nm	40	90	122	210	423
		5	Nm	40	90	122	210	423
		7	Nm	34	48	95	170	358
		10	Nm	16	22	56	86	210
	L2	12	Nm	27	50	96	161	364
		15	Nm	27	50	96	161	364
		16	Nm	40	90	122	210	423
		20	Nm	40	90	122	210	423
		25	Nm	40	90	122	210	423
		28	Nm	40	90	122	210	423
		30	Nm	27	50	96	161	364
		35	Nm	40	90	122	210	423
		40	Nm	40	90	122	210	423
		50	Nm	40	90	122	210	423
		70	Nm	34	48	95	170	358
		100	Nm	16	22	56	86	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.95	2.27	3.06	6.93	15.5
Weight	L2		kg	1.2	2.8	3.86	8.98	17

Application:	Machine Tool
Speed:	Low Speed
Function:	Driving
Casing Protection:	Closed Type
Starting Mode:	Direct on-line Starting
Certification:	ISO9001

###

Samples:	US$ 105/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PRN60	PRN80	PRN90	PRN120	PRN160
Technal Parameters				PRN60	PRN80	PRN90	PRN120	PRN160
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	400	450	1240	2250
Max. Axial Load			N	220	420	430	1000	1500
Torsional Rigidity			Nm/arcmin	1.8	4.7	4.85	11	35
Max.Input Speed			rpm	8000	6000	6000	6000	4000
Rated Input Speed			rpm	4000	3500	3500	3500	3000
Noise			dB	≤58	≤60	≤60	≤65	≤70
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥96% L2≥94%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		4	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		5	Kg*cm2	0.46	0.77	1.73	12.78	36.72
		7	Kg*cm2	0.41	0.65	1.42	11.38	34.02
		10	Kg*cm2	0.41	0.65	1.42	11.38	34.02
	L2	12	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		15	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		16	Kg*cm2	0.72	0.72	1.49	12.18	34.24
		20	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		25	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		28	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		30	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		35	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		40	Kg*cm2	0.44	0.72	1.49	12.18	34.24
		50	Kg*cm2	0.34	0.58	1.25	11.48	34.02
		70	Kg*cm2	0.34	0.58	1.25	11.48	34.02
		100	Kg*cm2	0.34	0.58	1.25	11.48	34.02
Technical Parameter	Level	Ratio		PRN60	PRN80	PRN90	PRN120	PRN160
Rated Torque	L1	3	Nm	27	50	96	161	364
		4	Nm	40	90	122	210	423
		5	Nm	40	90	122	210	423
		7	Nm	34	48	95	170	358
		10	Nm	16	22	56	86	210
	L2	12	Nm	27	50	96	161	364
		15	Nm	27	50	96	161	364
		16	Nm	40	90	122	210	423
		20	Nm	40	90	122	210	423
		25	Nm	40	90	122	210	423
		28	Nm	40	90	122	210	423
		30	Nm	27	50	96	161	364
		35	Nm	40	90	122	210	423
		40	Nm	40	90	122	210	423
		50	Nm	40	90	122	210	423
		70	Nm	34	48	95	170	358
		100	Nm	16	22	56	86	210
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	0.95	2.27	3.06	6.93	15.5
Weight	L2		kg	1.2	2.8	3.86	8.98	17

The Basics of a Planetary Gearbox

The basic model of a planetary gearbox is a highly efficient transmission that transmits nearly ninety percent of the power it receives. The basic planetary gearbox comes in three basic types: Inline, Helical, and Spur. Below, we will discuss the differences between each of them and which one is better for your needs. A planetary gearbox is an important part of any engine and may be the perfect choice for your vehicle.
planetarygearbox

Inline planetary gearbox

An inline planetary gearbox has an inline arrangement of gears that enables the transfer of power. Its design makes it stable and reliable, and the space and weight-saving benefits make it a popular choice for many applications. Planetary gearboxes have low inertia, high torque, and a wide range of reduction ratios, which make them a versatile choice for many industries. To find out more about this type of gearbox, read about its construction and specifications.
A planetary gearbox is composed of two parts: a sun gear (also called the central or input gear), and two planet gears (also called outer gears). These gears are connected to each other via a carrier. In order to get the best performance from your gearbox, it’s important to find a model with the features and benefits required for your application. Also, be sure to check out the delivery time, global availability, and customer service of your selected constructor. A few constructors are faster than others and have the ability to respond quickly, while others can deliver every single planetary gearbox out of stock.
Whether you’re using an inline planetary gearbox for your car’s transmission, or you’re building a new machine, it’s important to choose the right size for your application. The most common ratio is five:1, but an inline gearbox can be as high as 1000:1! The torque range is between 250-950 lb-in for continuous torque, and up to 5800 lb-in for yield torque. Some companies even offer custom shafts if you need them to fit a specific application.
Inline planetary gearboxes have a high ratio of helical rotation and are useful for applications where space is limited. Their low-backlash design allows them to handle high torques and high accelerations without backlash. Despite their compact size, planetary gear systems also have high single-stage reduction ratios, a feature that makes them ideal for a variety of industrial applications. They can also be connected for high reduction ratios.
An inline planetary gearbox can be used in many applications, from small tools to heavy industrial machinery. Its basic design includes three components: an input gear pair, an output gear pair, and a stationary position. Some planetary gearbox designs also include additional gear sets that can provide a slight offset between input and output. A planetary gearbox may also contain multiple bearings, which make the assembly more robust and reliable.
Inline planetary gear reducers are commonly used in industrial settings to slow down an electric motor. They are able to multiply torque, which means they can reduce the input speed to a level where the mechanical devices inside the motor can function properly. This type of gear reducer also has a low clearance, which makes it ideal for machines with high torque. However, you should consider the amount of torque required in your application before you make a purchase.
planetarygearbox

Helical planetary gearbox

A helical planetary gearbox is a type of mechanical system. The gears are connected by joints to the carrier that holds the planets stationary. The sun gear serves as an input to the other gears, and the planet gears rotate at a rate that depends on the number of teeth in each gear. The ratio between these gears is -Ns/Np, and the number of teeth in the ring is N r, N s, and N p.
Another type of planetary gearbox uses multiple helical axes to distribute the load. This design also offers high stiffness and low backlash, which is important for applications involving frequent start-stop cycles and rotational direction changes. It also features a compact design and low mass inertia. A helical planetary gearbox can be used for a wide range of applications. Listed below are some of the benefits of helical gear technology.
The basic design of a helical planetary gear is based on the principle of stepping planets. This concept eliminates the need for timing marks and restrictive assembly conditions. The planetary gear’s helical shape can be modified to achieve a greater transmission ratio in an equal or smaller volume. For example, a 50-T ring gear will yield the same effect as a 100-T ring gear.
In addition to the helical axis, a helical planetary gearbox also has a wide variety of secondary features that are critical to torque transmission. For instance, compact needle roller bearings are appropriate for a helical planetary gearbox because of their low-profile design and small space. However, a tapered roller bearing is better suited to handling high axial forces. In general, a helical planetary gearbox will have a higher efficiency rate and lower noise levels.
A helical planetary gearbox will have a number of components that can vary in size and shape. They will include a sun gear and many planetary parts. The central sun gear will take a low-torque input and will run multiple external gears to increase the torque and speed. This basic model of a planetary gearbox is highly efficient, transferring 97% of the power input. There are three main types of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
The CZPT is a good example of an entry-level helical planetary gearbox. It is extremely reliable and aimed at providing torque in quiet applications with high precision. The Access series is another option, which is designed to meet the needs of the low-backlash planetary gearbox market. It features helical planetary gears with five to eight arc-minutes backlash, and is built on a monobloc housing.
A helical planetary gearbox is widely used in 3D printing. They are lightweight and can provide a high gear ratio. In addition to their low weight and high efficiency, some people have installed them into 3D printers to improve the accuracy of their designs. And in addition to 3D printing, helical gears are used in many industrial applications. If you’re thinking about purchasing one, you should know what the benefits are.
planetarygearbox

Spur planetary gearbox

There are many advantages to a spur planetary gearbox, from its compact design and low cost to its unmatched power transmission capacity per unit volume. Planetary gears have high efficiency per stage and can achieve up to 95% efficiency, depending on the ratio. Planet gears are mounted on a joint carrier, and the output rotation speed is slower than the drive rotation speed, which leads to increased torque. The higher the gear wheels, the more torque the unit can produce.
A spur planetary gearbox incorporates multiple other gear sets that must have helical teeth. These other gear sets must be helical, and the motor must be aligned with the driven parts. The spur gears are the most efficient type of planetary gear, as their teeth are symmetrical, which means no axial forces are generated. The difference between a spur and a planetary gearbox is its shape.
The right angle spur planetary gearbox is a versatile design with a spiral bevel gear that provides superior smoothness and quiet operation. This gearhead is case-hardened and ground to increase its efficiency. These gears can be purchased in 3-100 ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
A spur planetary gearbox utilizes spur gears around the circumference of the mechanism. The spur gears rotate between gears that have internal and external teeth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and sun gears. A spur gearbox can also be considered a compound planetary gear. It is typically used for servo applications. Unlike spur gears, helical planetary gears are easier to maintain and have lower noise levels.
The most notable difference between a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur gear head is less complex, but cannot handle the same amount of load as a planetary gearhead. Both types can achieve the same backlash, but a planetary gearhead has better lubrication retention than a spur gear. It can run at higher speeds without excessive lubrication, while a spur gear drive is more efficient at low speeds. The reduction ratio of a planetary gearhead is near unity while that of a planetary gear head is many thousand to one.
A planetary gearbox has many applications. Plastic machinery, goods & personnel lifts, and machine tools are all prime examples of these types of gearing systems. Other industries that use these gears include wind turbines and sugar crystallizers, as well as steel and sugar mills. And of course, the use of planetary gears is not limited to these industries. It is used in many different ways, including slewing drives, mill drive, and derrick & dockyard cranes

China High Torque Low Backlash NEMA34 Motor Planetary Reducer Gearbox advantages of planetary gearbox
editor by czh 2022-12-25

China High Torque Shimpo Helical Planetary Gear Speed Reducer Reduction Gearbox for Servo Motor with Best Sales

Product Description

High Torque CZPT Helical Planetary Gear Speed Reducer Reduction Gearbox For Servo Motor

1.Sending the order code like GPB042-L1

2.Provide Motor model / drawing and output torque

Planetary Reducer

As a professional speed reducer manufacturer, GIGAGER is specialized in producing planetary gearhead reducer for more than 10 years. All of GIGAGER planetary gearboxes are designed with integral structure with large span of the front and rear bearings distributed inside the box body, forming a stable integrated structure to ensure transferring the largest torque in the most compact form.

1. What is the Planetary Reducer?

Planetary gear system is a type of epicyclic gear system used in precise and high-efficiency transmissions.
We have abundant of experience in manufacturing planetary gearbox and gear components such as sun gear, planet carrier, and ring gear in China. We employ the most advanced equipment and technology in manufacturing our planetary gear sets.
We offer a wide range of planetary gearbox for your gear reduction projects.

2. What is the Product Features?

• Low backlash to meet users’ precision transmission requirement.
• High efficiency of output ensure the excellent working performance of user’s equipment.
• High quality with free maintenance.
• Helical transmission, more stable, more loading
• Special designed integral structure makes bigger radial and axial load
• Low noise and small volume
• Multiple model and gear ratio options

To Be Negotiated 1 Piece
(Min. Order)

###

Feature:	High Speed
Step:	Multi-Step
Layout:	Coaxial
Openness:	Open
Installation:	Horizontal
Transmission Form:	Gear

###

Customization:	Available \| Customized Request

To Be Negotiated 1 Piece
(Min. Order)

###

Feature:	High Speed
Step:	Multi-Step
Layout:	Coaxial
Openness:	Open
Installation:	Horizontal
Transmission Form:	Gear

###

Customization:	Available \| Customized Request

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China High Torque Shimpo Helical Planetary Gear Speed Reducer Reduction Gearbox for Servo Motor with Best Sales
editor by czh2022-11-25

China Custom Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor bicycle planetary gearbox

Warranty: 1 year, 1 Year
Applicable Industries: Building Material Shops, Construction works , Mechanical, Robotic Industry
Weight (KG): 2 KG
Customized support: OEM, ODM
Gearing Arrangement: Planetary
Output Torque: 16.5-280Nm
Input Speed: 4200-7000rpm(max)
Output Speed: 14-280rpm
Product name: Planetary Gear Reducer
Application: Machine Tool
Type: Reducer
Ratio: 3-350
Material: Cast Iron
Model: PLE060A 085A 115A 160B
Usage: Automatic Gate
Quality: Super
Packing: Carton Box
Port: HangZhou

Products Description Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor * High torque gearbox reducer. High quality, durable to use. * Low friction motor, low operating noise , easy operation. * Power saving, low heat, light weight and easy installation. * High transmission efficiency, wide speed range, high precision. * The return gap is small, great rigidity, and with strong bearing capacity.

Product Name	Planetary Gear Reducer
Applicable Industries	Building Material Shops; Construction Works; Robotic Industry; Machine Tool
Application	Automation Industry
Output Torque Tn	16.5-280Nm
Input Speed	4200-7000rpm(max)
Ratio	3-350
Model	PLE060A 085A 115A 160B

Model ratio
L1	3 4 5 7 10
L2	50 70
L3
Design	OEM and ODM Orders are welcome

Company Profile FAQ Q: How long is your delivery time?A: Generally it is 10 days if the goods are in stock. or it is around 30 days if the goods are not in stock, it is according toquantity.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample but not free, and do not pay the cost of freight.Q: Can you provide OEM service?A: Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.Q: What is your terms of payment ?A: Payment=1000USD, 30% T/T in advance, balance before shippment.If you have another question, pls feel free to contact us as below: Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper MotorPlanetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper MotorPlanetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor

The Basics of a Planetary Gearbox

Inline planetary gearbox

Helical planetary gearbox

Spur planetary gearbox

China Custom Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor bicycle planetary gearbox
editor by czh

China factory 10 GF high torque transmission planetary motor gearbox planetary gearbox disassembly

Warranty: 1 years
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Home Use, Other
Weight (KG): 0.01
Customized support: OEM, ODM
Gearing Arrangement: Spur
Output Torque: 600-900 gf-cm
Input Speed: –
Output Speed: –
Name: 10 GF high torque transmission planetary motor gearbox
Keywords: motor gearbox
Size: 10mm
Noise: <30db
Reduction ratio: 100-250
Rated torque: 200g.cm-300g.cm
Instantaneous permissible torque: 600g.cm-900g.cm
Spiral groove type: Level
Screw hole nominal size: M1.4
Screw distributed from: 7.2
Packaging Details: Packaging: single carton packing, 500 pieces per box.
Port: Every port in China

Reduction ratio	Series	Dimension	Rated torque	Instantaneous permissible torque	Noise
100	5	Φ10	200g.cm	600g.cm	<30db
250	5	Φ10	300g.cm	900g.cm	<30db

10 GF high torque transmission planetary motor gearbox Installation method: press the motor gear on the motor shaft —- — the gearbox is fixed on the motorOperating temperature:-10℃+60℃Environmental certification:ROHS,CE,REACH- SVHCAbout QQMHave passed ISO9001, CE, RoHS,TUV certifications and etc.Have been awarded 22 patents and another 11 pending.Have More than 2000 agents around the world since 2571.ODM & OEM support,Nice quality, Quick shipping, Factory direct price, Small order welcome.
Limit Discounts Hot Promotion Quick Shipping About QQM Certifications Why choose us

Planetary Gearbox

planetary gearboxes

Their design

Applications

Maintenance

China factory 10 GF high torque transmission planetary motor gearbox planetary gearbox disassembly
editor by czh

High shop made in China replacement parts in Vereeniging South Africa Torque Planetary Gearbox Speed Drive Reducer Gear Motor with top quality

We – EPG Group the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

R Sequence Helical Gear Speed Reducer Gearmotor with Challenging Surface area

Product Description
ept planetary gear motor
Complex knowledge:
one. Ratio selection: 8.1-191
two. Enter electricity: .twelve-270 KW
three. Permit torque rang: ≤ 50000 N. M
4. Output speed: .3~205 r/min
five. Construction: Foot-mounted, flange-mounted, shaft-mounted

Input construction	motor,IEC flange
Output velocity	motor,IEC flange,input shaft
	sound shaft, hollow shaft with key,with shrink disk

Attribute:
1. Adopt optimized layout, module blend, appropriate angle output, space reduction
2. Large strength and longevity gears
three. Can be blended with numerous motors, wider ratio variety
four. Big output torque, easily startup, substantial performance

Applications

Transmission Gearbox reducer are broadly utilized in :
Ceramic Sector
Glass Business
Foods Industry
Metallurgy Sector
Beer& Consume Market
Printing and dyeing Business
Textile Sector
Warehouse Logoistics Market
Wooden wor ept Equipment
environmental defense products Market
Leather Industry
Pharmacy Business

FAQ:
one.Are you a manufacturing unit or trader ?
We are a professional manufacturing facility which has 20 many years history specialized in gear transmission .
2.MOQ:
Our MOQ is 1pcs. However there is a single managing expense $a hundred and fifty for the solitary get which significantly less than $3000.00
3. Guarantee
Our guarantee is 12months
4. Payment term
100% T/T in ept and LC at sight .
five. Do you acknowledge customization ?
Indeed.SGR have robust R&D team, we can offer customizable service according to requirements.
six. Packing
Normally we use normal export plywood situation to set up the shipment .
7. Shipping time
In typical ,time of delivery is 30days right after acquiring the prepayment .
eight. What varieties of certification do you use ?
DNV-ISO9001:2008, SGS,CE etc, And new items patent.
nine. What sorts of inspection you do prior to shipment ?
We do temperature check, noise, and oil leak inspection and commissioning prior to shipment.
ten.How do you solve if the manufacturing have dilemma ?
Primarily, we do not need buyer send out the items back again to us. Since the value is very high, if there satisfies a difficulty,we firstly ask for the photographs for destroyed areas. And foundation on the photographs, we can have a simple notion for the defect reason. Our promise is twelve months, if during the promise, we can provide repair .

The use of unique gear manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our organization and the outlined alternative components contained herein are not sponsored, authorized, or made by the OEM.

High shop made in China replacement parts in Vereeniging South Africa Torque Planetary Gearbox Speed Drive Reducer Gear Motor with top quality

NEMA manufacturer made in China replacement parts in Edinburgh United Kingdom 8 20mm High Torque Hybrid Stepper Geared Motor with Planetary Gearbox with top quality

NEMA manufacturer made in China replacement parts in Edinburgh United Kingdom 8 20mm Large Torque Hybrid Stepper Geared Motor with Planetary Gearbox with top good quality

We – EPG Team the most significant gearbox & motors , couplings and gears factory in China with 5 distinct branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Hybrid Stepper Planetary Equipment Motor

Parameter:

HP201-1 20MM
Stepper Angel: 1.8

Drawing:

Motor Electrical Specification:

Sequence Design	Stage Angle ( o )	L (mm)	Rated Current (A)	Section Resistance (Ω)	Section Inductance (mH)	Keeping Torque (N.cm)	Detent Torque (N.cm)	Lead Wire (NO.)	Motor Fat ( g)
HP201-57121	one.8	28	.2	23	eight.two	one.four	.2	4	50
HP201-57121	1.eight	34	.two	25	eight.four	1.eight	.three	four	70
HP201-003571	one.eight	40	.two	32	8.eight	2.6	.5	four	82
Other Motor Electrical Specification make sure you refer to Hybrid Stepper Motor internet

Gearbox Specification:

Ratio	three.71	five.eighteen	14	19	27	fifty one	seventy one	one hundred	139	189	264	369
Reducer Series	1		2			3				4
Length ( mm)	22.4		33.			41.5				49.eight
Allowable Torque (Kg.cm)	6		10			16				20
Instantaneous Torque (Kg.cm)	18		30			48				60
Performance (%)	90%		81%			73%				66%
Excess weight (g)	35		45			55				65
We can manufacture merchandise according to customer’s needs

About Us:

We specialised in studying, building and servicing electrical motors, gearbox and substantial precision gears with the tiny modules.

After a long time of development, we have an unbiased merchandise layout and R&D team, services crew and professional top quality management crew.

What’s more, we have two joint ventures. One particular is situated in HangZhou, which generates hybrid stepper motor, treasured linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.

An additional one is located in HangZhou, which creates DC equipment motor. The factory has dozens of CNC equipment and high precision take a look at products, implements the procedure management and automated procedure in most creating procedure.

We also have two cooperation factories. 1 is producing AC reversible synchronous motor and AC servo motor, the other one particular is producing linear everlasting stepper motor, long lasting stepper motors.

Customer’ Go to:

Bundle:

Related Goods:

The use of first equipment manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the listed substitution parts contained herein are not sponsored, authorized, or manufactured by the OEM.

NEMA manufacturer made in China replacement parts in Edinburgh United Kingdom 8 20mm Substantial Torque Hybrid Stepper Geared Motor with Planetary Gearbox with leading good quality

High manufacturer made in China replacement parts in Pointe Noire Congo Torque Low Rpm Planetary DC Motor with Gearbox with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing unit in China with 5 different branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Higher Torque Low Rpm Planetary DC Motor with Gearbox

PG36M555 Series

voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Pace variety: 3000-9500rpm
energy: 3.3-13w
Normal applications: Central air-conditioning valve, Amusement equipment, Coin
Refund gadgets, Grill, Oven, Peristaltic pumps, ATM lender
Computerized method, Robot, Healthcare equipment, Office
Tools, House appliances, Computerized actuator.
Excess weight: 320~400g/PCS(approx)
Pac ept details: CTN dimension: 32X28XH26cm 40PCS/CTN G. W. 16Kgs

Gearbox data:

Amount of stages	1stages reduction	2 phases reduction	3 stages reduction	4 stages reduction	5 levels reduction
Reduction ratio	3.75.2	13.719.226.9	fifty.971.299.5139	188264369516721	6699771367191126723736
gearbox length ” L” mm	26.4	32.six	38.nine	45.3	52.five
Max.Operating torque	3.0Kgf @ cm	6.0Kgf @ cm	8.0Kgf @ cm	twelve.0Kgf @ cm	20Kgf @ cm
Max. Equipment brea ept torque	9.0Kgf @ cm	18.0Kgf @ cm	24Kgf @ cm	36Kgf @ cm	60Kgf @ cm
Max. Gearing performance	90%	81%	seventy three%	sixty five%	fifty nine%

Motor data:

Motor identify	Rated volt.v	No load		Load torque				Stall torque
		Present	Pace	Existing	Pace	Torque	Output electrical power	Torque	Present
		mA	r/min	mA	r/min	gf @ cm	W	gf @ cm	mA
RS-555123000	12	≤140	3000	≤800	2200	one hundred fifty	three.three	600	3000
RS-555124500	twelve	≤220	4500	≤1200	3300	220	7.2	880	7800
RS-555126000	12	≤350	6000	≤2000	4500	300	13.five	1200	6000
RS-555243000	24	≤70	3000	≤400	2200	150	three.three	600	1600
RS-555244500	24	≤110	4500	≤600	3300	220	seven.two	880	3000
RS-555246000	24	≤180	6000	≤1000	4500	300	thirteen.5	1200	4000
1This desk lists some motors parameters, other folks please refer to distinct parameters of rs-555.htm” 2Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput velocity:motor velocity / reduction ratio.

NOTE:

   1 Gearmotor named techniques: e . g . SG-555123000-99.5K    Motor please refer to the motor information RS-555123000.
          Gearbox please refer to gearbox data reduction ratio99.5 .Connected to gearmotor output speed and torque please
          refer to motor info.
   2 Motor can be mounted wiht magnetic encorder. encorder parameters make sure you refer to me-37.htm .
   3Standard output shaft after reducing: 8.0mm. other measurements of then output shaft can make as consumer ask for.
   4Chart only for reference,goods shall prevail the entity.

Organization Introduction

The use of unique gear manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our organization and the shown substitute components contained herein are not sponsored, accredited, or created by the OEM.

High manufacturer made in China replacement parts in Pointe Noire Congo Torque Low Rpm Planetary DC Motor with Gearbox with top quality