Product Description
PROFESSIONAL MANUFACTURE
— SINCE 1995
Hydraulic Motor Planetary Gear Speed Reducer Gearbox for Mill
Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light
industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.
Product Description
Adopts modular design, which can be changed and combined according to customer requirements;
Adopts involute planetary gear transmission, uses internal and external meshing and power splitting;
The gears are all treated by carburizing and quenching to obtain a high-hard wear-resistant surface.
After heat treatment, the gears are all ground, which reduces noise and improves the efficiency and service life of the whole machine.
Light weight, small volume, large transmission ratio range, high efficiency, stable operation, low noise and strong adaptability.
Product Parameters
|
Size |
Type |
Transmission Ratio |
Type |
Transmission Ratio |
|
|
9/10/11/12/13/14/ |
P2NA/P2NB/ |
25/28/31.5/40 |
P3NA/P3NB/P3NC/P3ND |
140/160/180/ |
N=Coaxial S=Helical gear L=Bevel gear K=Bevel-helical A=Hollow shaft with shrink disc B=Solid shaft with parallel key C=Hollow shaft with involute splines D=Solid shaft with involute splines
|
|
P2SA/P2SB/ |
45/50/56/63 |
P3SA/P3SB/P3SC/P3SD |
280/315/355/400 |
||
|
P2LA/P2LB/ |
31.5/40/45/50 |
P3KA/P3KB/P3KC/P3KD |
560-4000 |
||
|
P2KA/P2KB/ |
112/125/140/160/ |
Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox.
Detailed Photos
Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.
In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.
Packaging & Shipping
Application
| Driven machines | |||
| Waste water treatment | Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears |
| Chemical industry | Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metal working mills | plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills |
| Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
| Frequency converters | Reciprocating compressors | ||
| Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower fans, blowers axial and radial |
| Cane sugar production | Cane knives, cane mills | Beet sugar production | Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter |
| Paper machines | Pulper drives | Cableways | Material ropeways, continuous ropeway |
| Cement industry | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers | ||
Company Profile
Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.
FAQ
1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).
2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.
3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher
4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery, Manufacturing Plant |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | Order Sample Hydraulic Motor Planetary Gear Reducer Gearbox
|
|---|
| Customization: |
Available
| Customized Request |
|---|
Challenges and Solutions for Managing Power Transmission Efficiency in Planetary Gearboxes
Managing power transmission efficiency in planetary gearboxes is crucial to ensure optimal performance and minimize energy losses. Several challenges and solutions are involved in maintaining high efficiency:
1. Gear Meshing Efficiency: The interaction between gears can lead to energy losses due to friction and meshing misalignment. To address this, manufacturers use precision manufacturing techniques to ensure accurate gear meshing and reduce friction. High-quality materials and surface treatments are also employed to minimize wear and friction.
2. Lubrication: Proper lubrication is essential to reduce friction and wear between gear surfaces. Using high-quality lubricants with the appropriate viscosity and additives can enhance power transmission efficiency. Regular maintenance and monitoring of lubrication levels are vital to prevent efficiency losses.
3. Bearing Efficiency: Bearings support the rotating elements of the gearbox and can contribute to energy losses if not properly designed or maintained. Choosing high-quality bearings and ensuring proper alignment and lubrication can mitigate efficiency losses in this area.
4. Bearing Preload: Incorrect bearing preload can lead to increased friction and efficiency losses. Precision assembly and proper adjustment of bearing preload are necessary to optimize power transmission efficiency.
5. Mechanical Losses: Various mechanical losses, such as windage and churning losses, can occur in planetary gearboxes. Designing gearboxes with streamlined shapes and efficient ventilation systems can reduce these losses and enhance overall efficiency.
6. Material Selection: Choosing appropriate materials with high strength and minimal wear characteristics is essential for reducing power losses due to material deformation and wear. Advanced materials and surface coatings can be employed to enhance efficiency.
7. Noise and Vibration: Excessive noise and vibration can indicate energy losses in the form of mechanical inefficiencies. Proper design and precise manufacturing techniques c
Contribution of Planetary Gearboxes to Conveyor Belt Efficiency in Mining Operations
Planetary gearboxes play a significant role in enhancing the efficiency of conveyor belts used in mining operations:
- High Torque Capability: Planetary gearboxes are capable of providing high torque output, which is essential for handling heavy loads of mined materials on conveyor belts.
- Compact Design: The compact nature of planetary gearboxes allows them to be integrated into tight spaces, making them suitable for conveyor systems where space is limited.
- Multi-Stage Design: Planetary gearboxes can achieve high gear ratios through multiple stages of gear reduction. This allows for efficient power transmission from the motor to the conveyor, reducing the load on the motor and increasing overall efficiency.
- Load Distribution: Planetary gearboxes distribute the load across multiple planet gears, which helps in minimizing wear and ensuring longer lifespan of the gearbox.
- Variable Speed Control: By using planetary gearboxes with variable speed capabilities, conveyor belts can be operated at different speeds to match the processing requirements, optimizing material handling and energy consumption.
- Overload Protection: Some planetary gearboxes feature built-in overload protection mechanisms, safeguarding the gearbox and conveyor system from damage due to sudden increases in load.
Overall, planetary gearboxes enhance the efficiency, reliability, and performance of conveyor belts in mining operations by providing the necessary torque, compact design, and precise control needed to transport mined materials effectively.
an help minimize noise and vibration, indicating better power transmission efficiency.
8. Efficiency Monitoring: Regular efficiency monitoring through testing and analysis allows engineers to identify potential issues and optimize gearbox performance. This proactive approach ensures that any efficiency losses are promptly addressed.
By addressing these challenges through careful design, material selection, manufacturing techniques, lubrication, and maintenance, engineers can manage power transmission efficiency in planetary gearboxes and achieve high-performance power transmission systems.
editor by CX 2023-08-30
China Best Sales Ratio 40: 1 Gear Reducer Right Angle Helical Transmission Planetary Gearbox for Stepper Motor comer planetary gearbox
Product Description
Ratio 40:1 Gear Reducer Right Angle Helical Transmission Planetary Gearbox for Stepper Motor
Characteristics:
(1) Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
(2) High Precision:Backlash is 3 arcmin or less,accurate positioning.
(3) High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
(4) High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
(5) Maintenance-Free:Low grease wear,can be lifetime lubrication.
(6) Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Wide Applicability:Applicable to any type of servo motor.
(9) An organic [integral] whole output axis.
Product Parameters
| Specifications | PXR42 | PXR60 | PXR90 | PXR120 | |||
| Technal Parameters | |||||||
| Max. Torque | Nm | 1.5times rated torque | |||||
| Emergency Stop Torque | Nm | 2.5times rated torque | |||||
| Max. Radial Load | N | 780 | 1530 | 3300 | 6700 | ||
| Max. Axial Load | N | 390 | 600 | 1500 | 3000 | ||
| Torsional Rigidity | Nm/arcmin | 2.5 | 6 | 12 | 23 | ||
| Max.Input Speed | rpm | 8000 | 8000 | 6000 | 6000 | ||
| Rated Input Speed | rpm | 4000 | 4000 | 3000 | 3000 | ||
| Noise | dB | ≤56 | ≤64 | ≤66 | ≤66 | ||
| Average Life Time | h | 20000 | |||||
| Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||
| Return Backlash | P1 | L1 | arcmin | ≤3 | ≤5 | ≤5 | ≤5 |
| L2 | arcmin | ≤5 | ≤7 | ≤7 | ≤7 | ||
| P2 | L1 | arcmin | ≤5 | ≤8 | ≤8 | ≤8 | |
| L2 | arcmin | ≤7 | ≤10 | ≤10 | ≤10 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 |
| 4 | Kg*cm2 | 0.12 | 0.4 | 2.28 | 6.87 | ||
| 5 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
| 7 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
| 8 | Kg*cm2 | / | 0.4 | 1.45 | 4.76 | ||
| 10 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
| 14 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
| 20 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
| L2 | 25 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | |
| 30 | Kg*cm2 | / | 0.4 | 2.28 | 6.87 | ||
| 35 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
| 40 | Kg*cm2 | 0.09 | 0.4 | 2.28 | 6.87 | ||
| 50 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
| 70 | Kg*cm2 | 0.09 | 0.3 | 1.45 | 4.76 | ||
| 100 | Kg*cm2 | 0.07 | 0.3 | 1.45 | 4.76 | ||
| Technical Parameter | Level | Ratio | PXR42 | PXR60 | PXR90 | PXR120 | |
| Rated Torque | L1 | 3 | Nm | / | 40 | 105 | 165 |
| 4 | Nm | 17 | 45 | 130 | 230 | ||
| 5 | Nm | 15 | 45 | 130 | 230 | ||
| 7 | Nm | 12 | 45 | 100 | 220 | ||
| 8 | Nm | / | 45 | 90 | 200 | ||
| 10 | Nm | 10 | 45 | 130 | 230 | ||
| 14 | Nm | / | 45 | 100 | 220 | ||
| 20 | Nm | / | 30 | 75 | 175 | ||
| L2 | 25 | Nm | 15 | 45 | 130 | 230 | |
| 30 | Nm | / | 40 | 105 | 165 | ||
| 35 | Nm | 15 | 45 | 130 | 230 | ||
| 40 | Nm | 17 | 45 | 130 | 230 | ||
| 50 | Nm | 15 | 45 | 130 | 230 | ||
| 70 | Nm | 12 | 45 | 130 | 230 | ||
| 100 | Nm | 15 | 46 | 130 | 230 | ||
| Degree Of Protection | IP65 | ||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | |||||
| Weight | L1 | kg | 0.7 | 2.05 | 6.45 | 13.7 | |
| L2 | kg | 0.9 | 3.15 | 8.8 | 17.2 | ||
Company Profile
Packaging & Shipping
1. Lead time: 10-15 working days as usual, 30 days in busy season, it will based on the detailed order quantity;
2. Delivery of samples: by DHL, Fedex, UPS, TNT, EMS
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Automation Equipment |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Samples: |
US$ 168/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Planetary Gearbox Basics
If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
Wheel drive planetary gearboxes
Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.
Spur gears
There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
Helical gears
A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.
Various sizes
There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
Applications
This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.
editor by CX 2023-06-12
China Synmot 60mm Ac servo gear motor servo motor with gear servo motor with reducer planetary gearbox cost
Guarantee: 3months-1year
Model Amount: 60A40B30C-RGx
Variety: SERVO MOTOR
Frequency: 50/60HZ
Stage: 3-stage
Shield Characteristic: Completely Enclosed
AC Voltage: 208-230 / 240 V
Effectiveness: Ie 3
Certification: ce
Rated Electricity: .4kW
Reduction Ratio: 5:1,7:1,ten:1
output Pace: 600rpm,428rpm, Precision appropriate Angle screw reducer high precision Angle 90 degree commutator gear box reducer 300rpm
Rated Voltage: 220V
Poles: eight
Certificated: CE /ISO 9001/2008
Packaging Specifics: wooden crated Packing / comply with consumer’s require
Port: HangZhou Port
Synmot 60mm Ac servo gear motor servo motor with equipment servo motor with reducer
Item photo:
:
Synmot servo motors are long lasting magnet synchronous motors,the primary characteristics such as :extremely strength-conserving .high response and accuracy .lower noise and minimal temperature increase.the rotor is produced of higher-performance exceptional-earth everlasting magnet material .works reliably and tomaintain much less.With minimal rotary inertia .it is straightforward to improve the rapidity of method .small volume.large pace and large torque.employing the higher-resilution encoder (17-bit .33-little bit) to increase the placement control precision.it management the current in accordance to D-P principal axis transformation .which boost the torque management precision from 5% to 2% .Synmot servo motor have been widely utilised in injection molding machienry .textile equipment.CNC equipment and so forth.
Solution Parameter:
| Rated Electricity kw | Rated Present A | Reduction Ratio N:one | Output Torque Nm | Output Speed rpm | D1 Sign-up Diameter mm | L5 Register Size mm | D2 Shaft Diameter mm | L6 Shaft Duration mm | L3 Crucial Size mm | L9 Flange Sq. mm | D3 Correcting Gap Dia. mm | D4 Repairing Hole Dis. mm | L8 Duration mm | |
| 60A20B30C-RGx | 0.20 | 1.6 | 5 | three | 600 | 50 | 7 | 16 | 36. | 25 | 62 | 5.five | 70 | 205 |
| seven | four | 428 | ||||||||||||
| ten | 6 | three hundred | ||||||||||||
| 60A40B30C-RGx | 0.forty | 2.seven | 5 | 6 | 600 | 50 | 7 | 16 | 36. | 25 | 62 | 5.5 | 70 | 225 |
| seven | 9 | 428 | ||||||||||||
| 10 | 13 | three hundred | ||||||||||||
| 80A70B30C-RGx | 0.75 | 3.1 | 5 | 11 | 600 | 80 | 10 | 22 | 49. | 30 | 90 | 6.six | 100 | 330 |
| seven | 16 | 428 | ||||||||||||
| 10 | 22 | 300 | ||||||||||||
| 130A10C20C-RGx | 1.00 | 4.one | 5 | 32 | four hundred | 110 | 12 | 32 | 66.5 | 45 | 115 | 9. | 130 | 315 |
| 7 | 45 | 286 | ||||||||||||
| 10 | sixty four | two hundred | ||||||||||||
| 130A15C15C-RGx | 1.fifty | 6.two | 5 | forty eight | 300 | 110 | 12 | 32 | 66.5 | 45 | 115 | 9. | 130 | 405 |
| 7 | 67 | 214 | ||||||||||||
| ten | ninety six | 150 | ||||||||||||
| 130A23C15C-RGx | 2.thirty | 9.eight | five | 73 | three hundred | 110 | 12 | 32 | 66.five | 45 | 115 | 9. | 130 | 455 |
| seven | 103 | 214 | ||||||||||||
| 10 | 146 | a hundred and fifty | ||||||||||||
| 190H33C15C-RGx | 3.30 | 8.2 | 5 | one zero five | three hundred | 160 | 20 | 55 | 108. | 65 | 185 | 13. | 215 | 435 |
| seven | 147 | 214 | ||||||||||||
| ten | 210 | one hundred fifty | ||||||||||||
| 190H40C15C-RGx | 4.00 | 10. | 5 | 127 | three hundred | 160 | 20 | 55 | 108. | 65 | 185 | 13. | 215 | 435 |
| 7 | 178 | 214 | ||||||||||||
| ten | 255 | one hundred fifty | ||||||||||||
| 190H55C15C-RGx | 5.fifty | 13. | five | a hundred seventy five | three hundred | 160 | 20 | 55 | 108. | 65 | 185 | 13. | 215 | 465 |
| 7 | 245 | 214 | ||||||||||||
| 10 | 350 | 150 | ||||||||||||
| 190H75C15C-RGx | 7.fifty | 17. | 5 | 239 | 300 | 160 | 20 | 55 | 108. | 65 | 185 | 13. | 215 | 505 |
| seven | 334 | 214 | ||||||||||||
| 10 | 478 | a hundred and fifty |
Mounting Proportions :
Synmot servo motor main benefit:
1.Extremely strength-preserving.higher reaction and accuracy .lower sound and reduced temperrature rise.
two.The rotor is made of substantial-functionality exceptional-earth.permanet magnet substance.performs reliably and to maintainless.
three.With minimal rotary inertia so that it is easy to boost the rapidity of technique .tiny voluime .substantial speed and substantial torque.
4.World-wide optimization utilizing Second and 3D inite element evaluation .with low cogging .reduced torque-ripple and low sounds and vibration .
5.Energy range is from .4KWto 100KW .with the motor rated velocity from 350 RPM to 20000RPM.
six.Higher acceleration and fast dynamic response .adopting higher precision opical encoder (17 little bit .33bit) to enhance the place management precision .it handle the present according to D-P principal axis transformation .which in crease the torque control accuracy from 5% to 2%.
Autoritative Certification:
Transport details:
FAQ :
one.Q:Can i get sample ?
A:We are hornered to offer you sample for swiftly examine .
two.Q:Do you have the solution in stock ?
A:All normal versions we received in inventory .specific products are manufactured in accordance to your prerequisite .
three.Q:When do you shipping ?
A:It generally take 3-7 working times .but the just time range from different get at the different time .
4.Q:Are the motors with brake ?
A:The normal without brake .but you can select to put in it or not .so the other size might be diverse .like duration.bodyweight and so on .
five.Q:How extended can it operates ?
A:Effectively use can work for 3 many years .
6.Q:Can the motors works in the drinking water?
A:No.our motors can not function in the water.but they can stop the splash h2o into the interior .
seven.Q:How do you gerrantee your motors ?
A:High quality comes very first.all the motor have to pass the testing and then packaaged to delivery .
eight.Q:Warranty time period ?
A:18 months right after the days then the items leave our manufacturing facility .
nine.Q:Payment period ?
A:In common.30% by T/T of the amount as deposit .70% by T/T of the amount require be compensated in 1 week soon after the day when you obtain the duplicate of the B/L by email or consultations .
About our company:
ZHangZhoug Synmot Electrical Technology Co.,Ltd (Synmot) is a subsidiary of China Chenglu Team .with a overall planned expenditure of eighty million USD.Synmot covers an spot of two hundred mu and the complete building spot is a hundred and eighty,000 square meters .now is striving to develop a Synmot servo sector zone.Synmot is dedicated to investigation and application of energy conserving technological innovation in machienry .is a specialist producer of servo motors . servo drives. and servo method . The rated electrical power of Synmot servo motors is .2-a hundred and sixty KW although the rated torque is 1-2500N.m and the rated pace is 350-twenty, Large Precision Planetary Reducer HTE HTF Gearbox for Servo Motor 000Rpm.The rated energy of servo drives is .4-160Kw.which can satisfy the requirement of exact motion handle in distinct industries .Synmot energy-saving program have beed extensively utilised in 50-3000ton in jection molding machienry .die casting machinery.hydraulic machienry.textile machinery.elevators.CNC machinery resources.printing and packing equipment .metallurgy and mines and many others .
Synmot has a famous electrical proffessor as the chief engineer .The technical group is composed of Ph.D.learn.senior engineers with robust potential of innovation and engineering .It has more than 30 style patens and hsa set up cooperation with ZHangZhoug college in creation .design and study.Synmot has laboratories for servo motors.servo drives.EMC and power-savign technologies.and can build the specifically specified servo program for automatic equipments.CNC equipment and inspestion units.
Synmot adopt computerized managements programs such as ERP.OA.PLM etc.The company culture is becoming good.cooperative and pursuing excellence.requires technologies as a manual. pays great attention to the solution high quality .so as to give a lot more surroundings-welcoming .more precise and more secure merchandise.to offer the specialist solutions in electrical servo techniques.
Our religion:
Respect Every single Consumer .Increase Customer’s Profits
Our Service Philosophy:
High quality Very best .Credit Very first and Customer First .
Our Provider :
With much more than ten several years of encounter.Synmot’s knowledge in bring innovative service remedies to transformation of conclude-customers.agent and machinery.
Manufacturer has united to from our service .
With a focus on progressive providers in servo field as properly as provide training assist .Synmot will supply agile .expense -competitive solutions.to clients can reduce charges.driving effectiveness.
We are listed here .about the clock.around the globe and always prepared.
Why select Synmot ?
01.Comprehensive power:
Synmot is 1 of the leading producers of servo techniques in china.
02.Specialized toughness:
The technology team has wealthy knowledge in hydraulic equipment and electric powered automatization .and is proficient in oil circuit method .electric powered system and higher control program .can have out R&D in accordance to client unique requirements.
03.customer’ Automated Transmission Gear For Machinery s service :
A.Give over-valued services including set up .debugging.upkeep and problems taking pictures.
B.Aid agent to expend company and supply one-cease provider.estabilish a trategic cooperative partnership with agents.develop and develop amazing performance collectively.
C.Offer value-successful goods.give exceptional soon after-product sales service.
Key Clientele:
Sincerely welcome all close friends to occur to check out us.negotiate company and look for frequent development .
Brokers wanted urgently
Any aid.pls get in touch with me :
Ms CZPT
/156691 0571 8
Planetary Gearbox Components
The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.
CFHK Series
The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.
CFX Series
The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.
CAP Series
The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
CAPK Series
The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.
CFH Series
The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
CZPT
If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.
editor by czh 2023-02-15
China Factory Price KPLF Precision Machine High Speed Reducer Gear Reduction Servo Electric Motor Planetary Gearbox bevel planetary gearbox
Warranty: 18 months
Applicable Industries: Resorts, Building Materials Outlets, Design works , Power & Mining
Fat (KG): 6.5 KG
Custom-made help: OEM
Gearing Arrangement: Planetary
Output Torque: one hundred eighty
Enter Pace: 3
Output Velocity: 180
Solution title: Planetary reducer
Large cost overall performance: Indeed
Ambient temperature: -15°C≤0≤40°C
Altitude: not exceeding 1000m
Speed ratio: 3 to one hundred eighty
MOQ: 10 PCS
Software: Machine Instrument
Packaging Details: carton picket deal
Port: HangZhou/HangZhou/HangZhou
| Item Kind | Planetary Reducer |
| Velocity Ratio | three to a hundred and eighty |
| Characteristic | 1. Durable and strength conservation and environmental security.2. Large value performance |
| MOQ | ten PCS |
| Payment | T/T |
| Port | HangZhou/ HangZhou/ HangZhou port |
| Shipping and delivery Time | five-fifteen days after compensated |
| See Far more | Make contact with | Residence | Feeds |
A Brief Overview of the Spur Gear and the Helical Planetary Gearbox
This article will provide a brief overview of the Spur gear and the helical planetary gearbox. To learn more about the advantages of these gearboxes, read on. Here are a few common uses for planetary gears. A planetary gearbox is used in many vehicles. Its efficiency makes it a popular choice for small engines. Here are three examples. Each has its benefits and drawbacks. Let’s explore each one.
helical planetary gearbox
In terms of price, the CZPT is an entry-level, highly reliable helical planetary gearbox. It is suitable for applications where space, weight, and torque reduction are of high concern. On the other hand, the X-Treme series is suitable for applications requiring high-acceleration, high-axial and radial loads, and high-speed performance. This article will discuss the benefits of each type of planetary gearbox.
A planetary gearbox’s traction-based design is a variation of the stepped-planet design. This variation relies on the compression of the elements of the stepped-planet design. The resulting design avoids restrictive assembly conditions and timing marks. Compared to conventional gearboxes, compound planetary gears have a greater transmission ratio, and they do so with an equal or smaller volume. For example, a 2:1 ratio compound planet would be used with a 50-ton ring gear, and the result would be the same as a 100-ton ring gear, but the planetary disks would be half the diameter.
The Helical planetary gearbox uses three components: an input, an output, and a stationary position. The basic model is highly efficient and transmits 97% of the input power. There are three main types of planetary gearboxes, each focusing on a different performance characteristic. The CZPT basic line is an excellent place to start your research into planetary gearboxes. In addition to its efficiency and versatility, this gearbox has a host of modular features.
The Helical planetary gearbox has multiple advantages. It is versatile, lightweight, and easy to maintain. Its structure combines a sun gear and a planet gear. Its teeth are arranged in a way that they mesh with each other and the sun gear. It can also be used for stationary applications. The sun gear holds the carrier stationary and rotates at the rate of -24/16 and -3/2, depending on the number of teeth on each gear.
A helical planetary gearbox can reduce noise. Its shape is also smaller, reducing the size of the system. The helical gears are generally quieter and run more smoothly. The zero helix-angle gears, in contrast, have smaller sizes and higher torque density. This is a benefit, but the latter also increases the life of the system and is less expensive. So, while the helical planetary gearbox has many advantages, the latter is recommended when space is limited.
The helical gearbox is more efficient than the spur gear, which is limited by its lack of axial load component. The helical gears, on the other hand, generate significant axial forces in the gear mesh. They also exhibit more sliding at the points of tooth contact, adding friction forces. As such, the Helical planetary gearbox is the preferred choice in servo applications. If you’re looking for a gearbox to reduce noise and improve efficiency, Helical planetary gearboxes are the right choice.
The main differences between the two types of planetary gears can be found in the design of the two outer rings. The outer ring is also called the sun gear. The two gears mesh together according to their own axes. The outer ring is the planetary gear’s carrier. Its weight is proportional to the portion of the ring that is stationary. The carrier sets the gaps between the two gears.
Helical gears have angled teeth and are ideal for applications with high loads. They are also extremely durable and can transfer a high load. A typical Helical gearbox has two pairs of teeth, and this ensures smooth transmission. In addition, the increased contact ratio leads to lower fluctuations in mesh stiffness, which means more load capacity. In terms of price, Helical planetary gears are the most affordable gearbox type.
The outer ring gear drives the inner ring gear and surrounding planetary parts. A wheel drive planetary gearbox may have as much as 332,000 N.m. torque. Another common type of planetary gearbox is wheel drive. It is similar to a hub, but the outer ring gear drives the wheels and the sun gear. They are often combined over a housing to maximize size. One-stage Helical gears can be used in bicycles, while a two-stage planetary gear system can handle up to 113,000 N.m. torque.
The design of a helical planetary geartrain is complicated. It must comply with several constraints. These constraints relate to the geometrical relationship of the planetary geartrains. This study of the possible design space of a Helical geartrain uses geometric layouts. The ring gear, sun, and ring gear have no effect on the ratio of the planetary transmission. Nonetheless, helical geartrains are a good choice for many applications.
Spur gear planetary gearbox
The combination of planetary gears and spur gears in a transmission system is called a planetary or spur gearbox. Both the planetary gear and spur gear have their own characteristics and are used in various kinds of vehicles. They work in a similar way, but are built differently. Here are some important differences between the two types of gears. Listed below are some of the most important differences between them:
Helical gears: As opposed to spur gears, helical gears generate significant axial forces in the gear mesh. They also feature greater sliding contact at the point of tooth contact. The helix angle of a gearbox is generally in the range of 15 to 30 degrees. The higher the helix angle, the more axial forces will be transmitted. The axial force in a helical gearbox is greater than that of a spur gear, which is the reason why helical gears are more efficient.
As you can see, the planetary gearhead has many variations and applications. However, you should take care in selecting the number of teeth for your planetary gear system. A five:1 spur gear drive ratio, for example, means that the sun gear needs to complete five revolutions for every output carrier revolution. To achieve this, you’ll want to select a sun gear with 24 teeth, or five mm for each revolution. You’ll need to know the metric units of the planetary gearhead for it to be compatible with different types of machines.
Another important feature of a planetary gearbox is that it doesn’t require all of the spur gears to rotate around the axis of the drive shaft. Instead, the spur gears’ internal teeth are fixed and the drive shaft is in the same direction as the output shaft. If you choose a planetary gearbox with fixed internal teeth, you’ll need to make sure that it has enough lubrication.
The other significant difference between a spur gear and a planetary gearbox is the pitch. A planetary gearbox has a high pitch diameter, while a spur gear has low pitch. A spur gear is able to handle higher torques, but isn’t as efficient. In addition, its higher torque capability is a big drawback. Its efficiency is similar to that of a spur gear, but it is much less noisy.
Another difference between planetary and spur gear motors is their cost. Planetary gear motors tend to be more expensive than spur gear motors. But spur gears are cheaper to produce, as the gears themselves are smaller and simpler. However, planetary gear motors are more efficient and powerful. They can handle lower torque applications. But each gear carries a fixed load, limiting their torque. A spur gear motor also has fewer internal frictions, so it is often suited for lower torque applications.
Another difference between spur gears and planetary gears is their orientation. Single spur gears are not coaxial gearboxes, so they’re not coaxial. On the other hand, a planetary gearbox is coaxial, meaning its input shaft is also coaxial. In addition to this, a planetary gearbox is made of two sets of gear wheels with the same orientation. This gives it the ability to achieve concentricity.
Another difference between spur gears and planetary gears is that a planetary gear has an integer number of teeth. This is important because each gear must mesh with a sun gear or a ring gear. Moreover, each planet must have a corresponding number of teeth. For each planet to mesh with the sun, the teeth must have a certain distance apart from the other. The spacing between planets also matters.
Besides the size, the planetary gear system is also known as epicyclic gearing. A planetary gear system has a sun gear in the center, which serves as the input gear. This gear has at least three driven gears. These gears engage with each other from the inside and form an internal spur gear design. These gear sets are highly durable and able to change ratios. If desired, a planetary gear train can be converted to another ratio, thereby enhancing its efficiency.
Another important difference between a spur gear and a planetary gearbox is the type of teeth. A spur gear has teeth that are parallel to the shaft, while a planetary gear has teeth that are angled. This type of gear is most suitable for low-speed applications, where torque is necessary to move the actuation object. Spur gears also produce noise and can damage gear teeth due to repeated collisions. A spur gear can also slip, preventing torque from reaching the actuation object.
editor by czh 2023-02-14
China Transmission Geared Motor Unit RV Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox manufacturer
Merchandise Description
Worm gearbox pace reducer electric motor dc are on sale with high top quality for you
SMRV 571-one hundred fifty worm equipment box with flange and electric motor
SMRV+NMRV Double Phase Arrangement Reduction Gear Box
RV Series Worm Gearbox
worm speed reducer
nmrv worm equipment motor
You can select the 1 type that you need kind these solution introction.
If you have any issue,please speak to me.
HangZhou Sihai Machinery Co.,ltd is a company specialized in research, manufacture and provider of speed gearbox. Ever since institution, we have been persisting in technical innovation, advancing the techonology to our items even though maintaining our rigid quality controls. It is the purpose that our merchandise branding ”Xihu (West Lake) Dis.n” have enjoyed this sort of successful global revenue.
At existing, our business mostly supplies 5 collection items as RV worm gearbox, UDL collection velocity variator,Computer sequence helical equipment device,G3 helical geared motor and SRC helical gearbox. The items are widely utilized in the mechanical products area this sort of as food and beverage,cement,package,chemical and dyeing, rubber and plastic, CNC equipment tool,and so forth.
Our items have been processed ISO 9001 Good quality System Certification and exported to Italy,Spain,Britain,Poland,Turkey.The United states of america and other European countries,make the good track record with our excellent high quality and support.
Clients 1st,buyers satisfaction, outstanding following sale support and incessant innovation are our tenet and motto. We will go all out to provide all the clients with substantial good quality and support.
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
###
| Customization: |
Available
|
|---|
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
###
| Customization: |
Available
|
|---|
Planetary Gearbox
This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetary gearboxes
Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
Their design
The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.
Applications
In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
Maintenance
The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.
editor by czh 2023-01-29
China HPS High Precision NEMA23 60mm Round Square Servo Gear Reducer Speed Reduction Planetary Gearbox for Servo Stepper Motor custom planetary gearbox
Solution Description
Merchandise Description
The reducer is normally utilised for lower-pace and substantial-torque transmission equipment. The motor, internal combustion engine or other higher-pace working power is used to attain the purpose of deceleration by meshing with the big equipment on the output shaft by way of a gear with a small number of teeth on the input shaft of the reducer. The reducer will also have numerous pairs of gears with the very same theory to accomplish the ideal reduction influence. The ratio of the quantity of tooth of the large and modest gears is the transmission ratio.
| SPECIFICATIONS | Stage | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | four | 25 | ||
| five | 28 | ||||
| 7 | 20 | ||||
| ten | 10 | ||||
| L2 | sixteen | 30 | |||
| 20 | 30 | ||||
| twenty five | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| fifty | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Enter Pace (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault cease torque(N.m) | 2 instances of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average existence span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.ninety five-4.5 | ||||
| IP | 54 | ||||
| Installation technique | Any set up method | ||||
Creation Assortment
forty two Collection Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: twelve,16,20,twenty five,28,35,forty,fifty,70
Body Dimension: 42mm Enter Flange
Gear Arrangement: Planetary Straight Tooth
60 Sequence Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,forty,50,70
Frame Dimension: 60mm Input Flange
Equipment Arrangement: Planetary Straight Tooth
90 Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,10,
L2: 16,twenty,twenty five,28,35,forty,50,70
Body Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Enamel
Powder Metal Series Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Selection:
L1: 4,5,7,ten,
L2: 16,twenty,25,28,35,40,fifty,70
Frame Dimension: 42mm & 57mm
Equipment Arrangement: Planetary Straight Tooth
Appropriate Angle Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,40,fifty,70
Frame Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Enamel
Software Area
Automated Arms
Assembly Line
3D-Printer
Medical -Gear
CNC Machine
Tapping Device
Other Automation Products
Why Decide on Us
ZheJiang Substantial Precision Gear Transmission Co., Ltd
Business
ZheJiang High Precision Gear Transmission Co., Ltd positioned in HangZhou city, ZheJiang Province, China. It is a major company devoted in precision transmission elements and technique analysis, manufacture and revenue, various sequence of items are manufactured in its 5000 square meters workshop, the precision planetary gearbox and equipment motor are produced especially for solar strength business and have served many big-scale photo voltaic assignments worldwidely.
The analysis team has far more than 15 many years encounters in this area, who can ensure a punctual and effective services to meet up with customer’s specific requirements. It has pasted the ISO9001 high quality administration method and CE, goods have been exported to lots of nations with a vast selection software in AGV, clever robot, logistic, industrial automation, photo voltaic vitality, vessel, packaging and textile and so on.Constantly, our aim is to advertise the software of solar energy industry in the world, and we think it offers thoroughly clean and sustainable strength for humanity to much better defend our setting.
WORKSHOP
CERTIFICATIONS
FAQ
Q:Which regions are your goods primarily used in?
A:At present, we have 2 major items: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are utilized in automation fields, this kind of as health-related products, 3D printers, door openers, tapping machines, CNC lathes and a collection of automation products. In addition, our photo voltaic geared motors are utilised in photovoltaic electrical power technology projects, which are largely combined with rotary drives to drive photo voltaic panels to observe sunlight.
Q : How to select the ideal planetary gearbox?
A :Initial of all, we require you to be CZPT to supply related parameters. If you have a motor drawing, it will enable us recommend a ideal gearbox for you quicker. If not, we hope you can give the subsequent motor parameters: output speed, output torque, voltage, current, IP, noise, functioning circumstances, motor dimensions and energy, and many others.
Q : What is the price ?
A : The principal determining factor for the price of each solution is the purchase quantity. You can talk with us and let us recognize every other. I think that our rates, solution top quality and our services can undoubtedly make you satisfied.
Q : Do you give personalized services?
A: Sure, we supply tailored services. You only require to set ahead your wants, and we will do our greatest to offer you with a plan, make strategies, and try out our ideal to satisfy your requirements.
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Double-Step |
###
| Samples: |
US$ 80/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | 4 | 25 | ||
| 5 | 28 | ||||
| 7 | 20 | ||||
| 10 | 10 | ||||
| L2 | 16 | 30 | |||
| 20 | 30 | ||||
| 25 | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| 50 | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Input Speed (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault stop torque(N.m) | 2 times of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average life span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.95-4.5 | ||||
| IP | 54 | ||||
| Installation method | Any installation method | ||||
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Double-Step |
###
| Samples: |
US$ 80/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
| Planetry Gearbox | L1 | 4 | 25 | ||
| 5 | 28 | ||||
| 7 | 20 | ||||
| 10 | 10 | ||||
| L2 | 16 | 30 | |||
| 20 | 30 | ||||
| 25 | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| 50 | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | Stepper Motor/ Servo Motor | ||||
| Rated Input Speed (rpm) | 3000/min | ||||
| Max Input Speed (rpm) | 6000/min | ||||
| Backlash | L1 | ≤5-10 Arcmin | |||
| L2 | ≤10-15 Arcmin | ||||
| Fault stop torque(N.m) | 2 times of rated torque | ||||
| Efficiency | L1 | 96% | |||
| L2 | 94% | ||||
| Average life span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.75-3.5 | |||
| L2 | 0.95-4.5 | ||||
| IP | 54 | ||||
| Installation method | Any installation method | ||||
Types, Applications, and Lubrication of Planetary Gearboxes
A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.
Applications of planetary gearboxes
The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.
Types
There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
Design
A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.
Lubrication
Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
Applications
This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.
editor by czh 2022-12-24
China High Torque Shimpo Helical Planetary Gear Speed Reducer Reduction Gearbox for Servo Motor with Best Sales
Product Description
High Torque CZPT Helical Planetary Gear Speed Reducer Reduction Gearbox For Servo Motor
1.Sending the order code like GPB042-L1
2.Provide Motor model / drawing and output torque
Planetary Reducer
As a professional speed reducer manufacturer, GIGAGER is specialized in producing planetary gearhead reducer for more than 10 years. All of GIGAGER planetary gearboxes are designed with integral structure with large span of the front and rear bearings distributed inside the box body, forming a stable integrated structure to ensure transferring the largest torque in the most compact form.
1. What is the Planetary Reducer?
Planetary gear system is a type of epicyclic gear system used in precise and high-efficiency transmissions.
We have abundant of experience in manufacturing planetary gearbox and gear components such as sun gear, planet carrier, and ring gear in China. We employ the most advanced equipment and technology in manufacturing our planetary gear sets.
We offer a wide range of planetary gearbox for your gear reduction projects.
2. What is the Product Features?
• Low backlash to meet users’ precision transmission requirement.
• High efficiency of output ensure the excellent working performance of user’s equipment.
• High quality with free maintenance.
• Helical transmission, more stable, more loading
• Special designed integral structure makes bigger radial and axial load
• Low noise and small volume
• Multiple model and gear ratio options
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Feature: | High Speed |
|---|---|
| Step: | Multi-Step |
| Layout: | Coaxial |
| Openness: | Open |
| Installation: | Horizontal |
| Transmission Form: | Gear |
###
| Customization: |
Available
|
|---|
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Feature: | High Speed |
|---|---|
| Step: | Multi-Step |
| Layout: | Coaxial |
| Openness: | Open |
| Installation: | Horizontal |
| Transmission Form: | Gear |
###
| Customization: |
Available
|
|---|
Planetary Gearbox
This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetary gearboxes
Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
Their design
The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.
Applications
In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
Maintenance
The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.
editor by czh2022-11-25
China Custom Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor bicycle planetary gearbox
Warranty: 1 year, 1 Year
Applicable Industries: Building Material Shops, Construction works , Mechanical, Robotic Industry
Weight (KG): 2 KG
Customized support: OEM, ODM
Gearing Arrangement: Planetary
Output Torque: 16.5-280Nm
Input Speed: 4200-7000rpm(max)
Output Speed: 14-280rpm
Product name: Planetary Gear Reducer
Application: Machine Tool
Type: Reducer
Ratio: 3-350
Material: Cast Iron
Model: PLE060A 085A 115A 160B
Usage: Automatic Gate
Quality: Super
Packing: Carton Box
Port: HangZhou
Products Description Planetary Reducer Gearbox Ratio 5:1 Gear Speed Reducer High Torque Input Shaft Reduction Stepper Motor * High torque gearbox reducer. High quality, durable to use. * Low friction motor, low operating noise , easy operation. * Power saving, low heat, light weight and easy installation. * High transmission efficiency, wide speed range, high precision. * The return gap is small, great rigidity, and with strong bearing capacity.
| Product Name | Planetary Gear Reducer | ||||||
| Applicable Industries | Building Material Shops; Construction Works; Robotic Industry; Machine Tool | ||||||
| Application | Automation Industry | ||||||
| Output Torque Tn | 16.5-280Nm | ||||||
| Input Speed | 4200-7000rpm(max) | ||||||
| Ratio | 3-350 | ||||||
| Model | PLE060A 085A 115A 160B | ||||||
| Model ratio | ||
| L1 | 3 4 5 7 10 | |
| L2 | 50 70 | |
| L3 | ||
| Design | OEM and ODM Orders are welcome | |
The Basics of a Planetary Gearbox
The basic model of a planetary gearbox is a highly efficient transmission that transmits nearly ninety percent of the power it receives. The basic planetary gearbox comes in three basic types: Inline, Helical, and Spur. Below, we will discuss the differences between each of them and which one is better for your needs. A planetary gearbox is an important part of any engine and may be the perfect choice for your vehicle.
Inline planetary gearbox
An inline planetary gearbox has an inline arrangement of gears that enables the transfer of power. Its design makes it stable and reliable, and the space and weight-saving benefits make it a popular choice for many applications. Planetary gearboxes have low inertia, high torque, and a wide range of reduction ratios, which make them a versatile choice for many industries. To find out more about this type of gearbox, read about its construction and specifications.
A planetary gearbox is composed of two parts: a sun gear (also called the central or input gear), and two planet gears (also called outer gears). These gears are connected to each other via a carrier. In order to get the best performance from your gearbox, it’s important to find a model with the features and benefits required for your application. Also, be sure to check out the delivery time, global availability, and customer service of your selected constructor. A few constructors are faster than others and have the ability to respond quickly, while others can deliver every single planetary gearbox out of stock.
Whether you’re using an inline planetary gearbox for your car’s transmission, or you’re building a new machine, it’s important to choose the right size for your application. The most common ratio is five:1, but an inline gearbox can be as high as 1000:1! The torque range is between 250-950 lb-in for continuous torque, and up to 5800 lb-in for yield torque. Some companies even offer custom shafts if you need them to fit a specific application.
Inline planetary gearboxes have a high ratio of helical rotation and are useful for applications where space is limited. Their low-backlash design allows them to handle high torques and high accelerations without backlash. Despite their compact size, planetary gear systems also have high single-stage reduction ratios, a feature that makes them ideal for a variety of industrial applications. They can also be connected for high reduction ratios.
An inline planetary gearbox can be used in many applications, from small tools to heavy industrial machinery. Its basic design includes three components: an input gear pair, an output gear pair, and a stationary position. Some planetary gearbox designs also include additional gear sets that can provide a slight offset between input and output. A planetary gearbox may also contain multiple bearings, which make the assembly more robust and reliable.
Inline planetary gear reducers are commonly used in industrial settings to slow down an electric motor. They are able to multiply torque, which means they can reduce the input speed to a level where the mechanical devices inside the motor can function properly. This type of gear reducer also has a low clearance, which makes it ideal for machines with high torque. However, you should consider the amount of torque required in your application before you make a purchase.
Helical planetary gearbox
A helical planetary gearbox is a type of mechanical system. The gears are connected by joints to the carrier that holds the planets stationary. The sun gear serves as an input to the other gears, and the planet gears rotate at a rate that depends on the number of teeth in each gear. The ratio between these gears is -Ns/Np, and the number of teeth in the ring is N r, N s, and N p.
Another type of planetary gearbox uses multiple helical axes to distribute the load. This design also offers high stiffness and low backlash, which is important for applications involving frequent start-stop cycles and rotational direction changes. It also features a compact design and low mass inertia. A helical planetary gearbox can be used for a wide range of applications. Listed below are some of the benefits of helical gear technology.
The basic design of a helical planetary gear is based on the principle of stepping planets. This concept eliminates the need for timing marks and restrictive assembly conditions. The planetary gear’s helical shape can be modified to achieve a greater transmission ratio in an equal or smaller volume. For example, a 50-T ring gear will yield the same effect as a 100-T ring gear.
In addition to the helical axis, a helical planetary gearbox also has a wide variety of secondary features that are critical to torque transmission. For instance, compact needle roller bearings are appropriate for a helical planetary gearbox because of their low-profile design and small space. However, a tapered roller bearing is better suited to handling high axial forces. In general, a helical planetary gearbox will have a higher efficiency rate and lower noise levels.
A helical planetary gearbox will have a number of components that can vary in size and shape. They will include a sun gear and many planetary parts. The central sun gear will take a low-torque input and will run multiple external gears to increase the torque and speed. This basic model of a planetary gearbox is highly efficient, transferring 97% of the power input. There are three main types of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
The CZPT is a good example of an entry-level helical planetary gearbox. It is extremely reliable and aimed at providing torque in quiet applications with high precision. The Access series is another option, which is designed to meet the needs of the low-backlash planetary gearbox market. It features helical planetary gears with five to eight arc-minutes backlash, and is built on a monobloc housing.
A helical planetary gearbox is widely used in 3D printing. They are lightweight and can provide a high gear ratio. In addition to their low weight and high efficiency, some people have installed them into 3D printers to improve the accuracy of their designs. And in addition to 3D printing, helical gears are used in many industrial applications. If you’re thinking about purchasing one, you should know what the benefits are.
Spur planetary gearbox
There are many advantages to a spur planetary gearbox, from its compact design and low cost to its unmatched power transmission capacity per unit volume. Planetary gears have high efficiency per stage and can achieve up to 95% efficiency, depending on the ratio. Planet gears are mounted on a joint carrier, and the output rotation speed is slower than the drive rotation speed, which leads to increased torque. The higher the gear wheels, the more torque the unit can produce.
A spur planetary gearbox incorporates multiple other gear sets that must have helical teeth. These other gear sets must be helical, and the motor must be aligned with the driven parts. The spur gears are the most efficient type of planetary gear, as their teeth are symmetrical, which means no axial forces are generated. The difference between a spur and a planetary gearbox is its shape.
The right angle spur planetary gearbox is a versatile design with a spiral bevel gear that provides superior smoothness and quiet operation. This gearhead is case-hardened and ground to increase its efficiency. These gears can be purchased in 3-100 ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
A spur planetary gearbox utilizes spur gears around the circumference of the mechanism. The spur gears rotate between gears that have internal and external teeth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and sun gears. A spur gearbox can also be considered a compound planetary gear. It is typically used for servo applications. Unlike spur gears, helical planetary gears are easier to maintain and have lower noise levels.
The most notable difference between a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur gear head is less complex, but cannot handle the same amount of load as a planetary gearhead. Both types can achieve the same backlash, but a planetary gearhead has better lubrication retention than a spur gear. It can run at higher speeds without excessive lubrication, while a spur gear drive is more efficient at low speeds. The reduction ratio of a planetary gearhead is near unity while that of a planetary gear head is many thousand to one.
A planetary gearbox has many applications. Plastic machinery, goods & personnel lifts, and machine tools are all prime examples of these types of gearing systems. Other industries that use these gears include wind turbines and sugar crystallizers, as well as steel and sugar mills. And of course, the use of planetary gears is not limited to these industries. It is used in many different ways, including slewing drives, mill drive, and derrick & dockyard cranes
editor by czh
in Gothenburg Sweden sales price shop near me near me shop factory supplier 2017 Gear Box Precision Speed Reducer Pumps Geared Motor manufacturer best Cost Custom Cheap wholesaler
we are assured to provide our buyers versatile and diversified services. It has established secure cooperation with several properly known universities and institutes in china these kinds of as, Zhejiang College, Jilin University, Specialized committee of national chain travel normal, Institute of countrywide chain generate, Zhejiang application engineering substance institute, Huhan content security institute and it cooperated to identified China 1st Auto chain institute with National chain travel institute. We are aiming to meet the calls for of the customers about the world.. 2017 EPT Box EPT Pace EPTT EPTs EPTed EPT
Programs:
EPT equipment, auto producing, textile printing and dyeing, environmental defense engineering, steel metallurgy, lifting transportation, mining transportation, building EPT and other EPTT.
Characteristics:
1. Shaft of the EPT grinding precision up to 5-six
two. 7 heavy warmth therapy approach
3. Industry’s initial Employs the interference tolerance very hot into the market
4. EPT good quality motor high pace bearing
5. EPT in accordance with the state stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd of GB/T28575-2012 for secondary strength performance
six. Use twenty crmnti shaft EPT materials, tooth of carburizing and quenching EPTC58-sixty one
7. The motor adopts B50A600 36 EPTT created for cold rolled silicon-metal sheet
eight. Pick QZY – two/one hundred eighty course H large temperature resistant enameled wire insulation class
9. Mchine EPTT effectiveness of a lot more than ninety seven%
10. The shell is manufactured of high top quality EPT alloy painting craft stunning use-resisting resistance to higher temperature
Proportions(mm)
| HP | Ratio | Product | A | Foot Dimension | J | K | M | X | Y | Input Shafi | Weight(kg) | |||||||||
| D | E | F | G | H | L | P1 | Q1 | S1 | T1 | W1 | ||||||||||
| 200W(one/8HP) | 1/5-1/one hundred twenty | 22CEPTT | 193 | 65 | one hundred thirty | a hundred and sixty | 90 | eleven | 13 | 17.5 | 60 | eighty | 151 | 97.five | twenty five | 22 | fourteen | sixteen | five | 8 |
| 400W(1/4HP) | one/three-one/forty | 22CEPTT | 198 | sixty five | 130 | a hundred and sixty | 90 | eleven | 13 | 17.five | 60 | eighty | 151 | ninety seven.five | 30 | 27 | sixteen | 18 | five | 8 |
| one/five-one/100 | 28CEPTT | 262 | ninety | a hundred and forty | a hundred and eighty | one hundred twenty | 11 | fifteen | 23 | sixty eight | ninety three | a hundred seventy five | 116 | 30 | 27 | 16 | 18 | five | twelve | |
| 750W(one/2HP) | one/three-1/40 | 28CEPTT | 272 | ninety | 140 | a hundred and eighty | a hundred and twenty | 11 | fifteen | 23 | sixty eight | 93 | 175 | 116 | 40 | 35 | 19 | 21.five | six | twelve |
| 1/three-one/one hundred twenty | 32CEPTT | 310 | one hundred thirty | a hundred and seventy | 210 | a hundred and sixty | thirteen | 20 | 31 | seventy three | 108.5 | 210 | 138.5 | forty | 35 | 19 | 21.five | 6 | 20 | |
| 1500W(1HP) | one/3-1/forty | 32CEPTT | 320 | 130 | 170 | 210 | 160 | 13 | 20 | 31 | seventy three | 108.five | 210 | 138.five | 50 | 40 | 24 | 27 | eight | twenty |
| one/five-one/one hundred | 40CEPTT | 365 | 150 | 210 | 260 | 205 | fifteen | 23 | 36 | 85 | 124 | 245 | one hundred sixty | fifty | forty five | 24 | 27 | eight | 32 | |
| two.2KW(1.5HP) | 1/3-one/forty | 40CEPTT | 365 | 150 | 210 | 260 | 205 | fifteen | 23 | 36 | 85 | 124 | 245 | one hundred sixty | 50 | 45 | 24 | 27 | 8 | 32 |
| 1/five-one/one hundred | 50CEPTT | 427 | a hundred and seventy | 265 | 325 | 230 | 19 | 30 | 51 | 117 | 149 | 303 | 200 | 52 | fifty | 28 | 31 | eight | 55 | |
| 3KW(2HP) | 1/three-1/forty | 40CEPTT | 365 | one hundred fifty | 210 | 260 | 205 | fifteen | 23 | 36 | eighty five | 124 | 245 | a hundred and sixty | fifty | forty five | 24 | 27 | 8 | 32 |
| one/5-1/one hundred | 50CEPTT | 427 | 170 | 265 | 325 | 230 | 19 | 30 | 51 | 117 | 149 | 303 | two hundred | 52 | fifty | 28 | 31 | eight | fifty five | |
|
4KW(3HP) |
1/3-one/ten | 40CEPTT | 365 | one hundred fifty | 210 | 260 | 205 | 15 | 23 | 36 | 85 | 124 | 245 | 160 | 50 | forty five | 24 | 27 | eight | 32 |
| 1/three-one/eighty | 50CEPTT | 427 | a hundred and seventy | 265 | 325 | 230 | 19 | thirty | fifty one | 117 | 149 | 303 | two hundred | 52 | fifty | 28 | 31 | eight | fifty five | |
| one/5-one/ninety | 60CEPTT | 537 | 210 | 300 | 370 | 280 | 24 | 35 | 55 | one hundred thirty five | 170 | 350 | 225 | 55 | fifty | 32 | 35 | 10 | 85 | |
| 5.5KW(4HP) | 1/3-1/20 | 50CEPTT | 427 | 170 | 265 | 325 | 230 | 19 | thirty | 51 | 117 | 149 | 303 | 200 | 52 | fifty | 28 | 31 | eight | 55 |
| 1/5-one/fifty | 60CEPTT | 537 | 210 | 300 | 370 | 280 | 24 | 35 | 55 | a hundred thirty five | a hundred and seventy | 350 | 225 | 55 | fifty | 32 | 35 | 10 | 85 | |
| seven.5KW(5HP) | 1/three-1/twenty | 50CEPTT | 427 | a hundred and seventy | 265 | 325 | 230 | 19 | thirty | fifty one | 117 | 149 | 303 | two hundred | fifty two | fifty | 28 | 31 | eight | fifty five |
| 1/3-1/fifty | 60CEPTT | 537 | 210 | 300 | 370 | 280 | 24 | 35 | 55 | 135 | 170 | 350 | 225 | fifty five | fifty | 32 | 35 | 10 | 85 | |
| 11KW(15HP) | 1/3-one/25 | 60CEPTT | 537 | 210 | three hundred | 370 | 280 | 24 | 35 | fifty five | a hundred thirty five | 170 | 350 | 225 | fifty five | fifty | 32 | 35 | 10 | 85 |
| 15KW(20HP) | one/3-1/25 | 60CEPTT | 537 | 210 | three hundred | 370 | 280 | 24 | 35 | fifty five | one hundred thirty five | one hundred seventy | 350 | 225 | fifty five | 50 | 32 | 35 | 10 | 85 |
EPTT amp EPT
one) ten~20 doing work daEPTTfor ready merchandise.
a) Urgently you should inform us in EPT.
two)We provide wooden situation for EPTT deal.
a)EPT specifications is considerable.
three)We assistance shipping and delivery ports: SHEN ZHEN, HONG KONG.
a) Other delivery port is considerable.
4)We accept FOB, CIF value.
Our Services
a. We offer a single-calendar year soon after sale support (except for the sporting components).
b. We help overEPTT training for EPTT installation and working.
c. Our engineers will be on-line for 24 several hours.
d. Welcome to visit our manufacturing facility, we would love to choose you up at HangEPT airport.
e. Photographs or movie for EPTT functioning and set up are offered.
EPTT Info
HangEPT YTD EPTT EPTT, Ltd is a supplier that EPTTizes in deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ing, planning and manufacturing all kinds of automated EPTT.
We can offer full tempered EPT EPT protector production line, this kind of as EPT chopping EPTT, poEPTTng EPTT, engraving EPTT, tempering furnace ,coating EPTT, EPT EPTT ,and so forth.
We can deliver engineers overEPTT to put in EPTTs and teach personnel to assist you create your EPTT.
Explain to us what you need, EPTTs, raw resources, EPT, solutions, good after product sales support?
Occur to us, we have a professional crew with wealthy experience to aid you.
EPTT policy: high quality is our soul, we adhere strictly to ISO 9001 good quality management program. We pay out consideration to every single detail, just take treatment of every detail, attempt our ideal to be exceptional.
Excellent items, credibility 1st, acquire-earn cooperation—– YTD will alwaEPTTbe your most honest spouse.
FAQ
one. How can i EPTT you about EPTT quality?
A: The thorough EPTT requirements (incXiHu (West EPT) Dis.Hu (West EPT) Dis. every single EPTT components) will be enclosd guiding the agreement.
two. Can you deliver engineers to my country?
A: Yes, of system. We assist overEPTT training for EPTT installation, functioning or after sale support.
three. May possibly i check out your factory and check out the creation routine?
A:Certain. It would be our pleasure to display our manufacturing unit to your esteemed company.
For much more details make sure you click on the button quotcontact quot beneath,
or just connect us by:
HangEPT YTD EPTT EPTT, LTD
Elaine XiHu (West EPT) Dis.e
Mob: 15707498210
in Kampala Uganda sales price shop near me near me shop factory supplier Helical Gear Motor Precision Gear Reducer manufacturer best Cost Custom Cheap wholesaler
The item well shows environmental protection and vitality saving. We are aiming to meet up with the demands of the clientele all around the world.. “We are constantly serving our buyers with our ideal goods.”
The horizontal ac 3hp EPT motor EPTT widely utilized metal business, EPTTry sector, or assembled with magnetic powEPTTclutch and brake , and so on. Ac EPT motor is EPTTly by way of the motor, interior combustion engines or other large speed running EPTT through the reduced rpm ac EPT motor input shaft of the much less variety of EPT engagement on the output shaft of huge EPT to attain the objective of the slowdown.
Product Features :
one,EPTed motor with traits: modest measurement, light bodyweight, knot no sounds, compact, maintenance-free of charge .
two, EPT motor substantial tightness. EPTed motor output EPT of the configuration seals and O -rings to prevent EPT motor EPT box grease reflux , stay away from harm to insulation getting older EPT motor
three, EPTed motors large performance. The EPT motor goods making use of the new silicon metal stamping die design, high precision main, powerful magnetic houses, EPTed motor cooling construction employing the new condition .
4, traits of a excellent EPT motor: EPT motor optimum style, the ST ( velocity – torque ) features optimized so that EPT motors can function for a range of working environments.
five, EPTed motors EPT, our organization has deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed its possess design and style team, EPTed motors can be EPT according to the customer ‘s certain needs requirements.
Our EPT EPT Benefits:
one: Item warranty interval:24 months
two:EPT EPT material is from EPTTiwan.
three: Using NSK, SKF, TPI bearings to make sure EPTT-phrase operating life.
four: Using IP55 dust-evidence and drinking water-evidence junction box.
5: Utilizing EPTTiwan substantial temperature oil seal, the oil seal can be utilised at -twenty-260 degress centigrade.
6: The precision stage of EPT shaft is 1-two course. Its substance is SCM21, EPTC58–60.
seven: The precision degree of EPT is 2-3 course,Its material is metal 45, EPTC58–sixty.
Proportions(mm):
| EPTT | Ratio | Code | Shaft(mm) | A | A1 | A2 | D | E | F | G | H | J | K | L | M | X | Y | Z |
| 100W | three-50 | one# | eighteen | 253 | 273 | 257 | 40 | a hundred and ten | a hundred thirty five | 65 | 9 | sixteen | 50 | 10 | 133 | 138 | 88.five | one hundred twenty |
| sixty-200 | 2# | 22 | 287 | 307 | 291 | 65 | a hundred thirty | 158 | 90 | 11 | seventeen.five | 60 | thirteen | 133 | 152 | ninety seven.five | one hundred twenty | |
| 200W | 3-ten | one# | 18 | 273 | 293 | 277 | forty | a hundred and ten | a hundred thirty five | 65 | 9 | sixteen | 50 | ten | 133 | 138 | 88.five | 120 |
| fifteen-90 | two# | 22 | 307 | 327 | 311 | sixty five | a hundred thirty | 158 | ninety | 11 | seventeen.5 | 60 | 13 | 133 | 152 | ninety seven.5 | one hundred twenty | |
| 100-two hundred | 3# | 28 | 333 | 353 | 337 | 90 | 140 | 178 | one hundred twenty | 12 | 23 | sixty eight | 17 | 133 | 178 | 116 | one hundred twenty | |
| 400W | three-10 | 2# | 22 | 327 | 346 | 331 | sixty five | a hundred thirty | 158 | 90 | eleven | seventeen.five | 60 | thirteen | 167 | 152 | ninety seven.five | 135 |
| 15-90 | 3# | 28 | 353 | 372 | 357 | ninety | a hundred and forty | 178 | 120 | 12 | 23 | sixty eight | 17 | 167 | 178 | 116 | a hundred thirty five | |
| 100-200 | four# | 32 | 388 | 407 | 392 | 130 | a hundred and seventy | 210 | one hundred sixty five | thirteen | 30 | 70 | 23 | 167 | 212 | a hundred and forty | one hundred thirty five | |
| 750W | three-twenty five | 3# | 28 | 382 | 415 | 382 | 90 | one hundred forty | 178 | a hundred and twenty | twelve | 23 | sixty eight | seventeen | 167 | 178 | 116 | 135 |
| 30-120 | 4# | 32 | 417 | 449 | 417 | 130 | one hundred seventy | 210 | a hundred sixty five | thirteen | thirty | 70 | 23 | 167 | 212 | a hundred and forty | a hundred thirty five | |
| 125-two hundred | five# | 40 | 444 | 476 | 444 | 150 | 210 | 265 | 198 | fifteen | 36 | eighty five | 24 | 167 | 250 | 162 | one hundred thirty five | |
| 1500W | three-30 | four# | 32 | 449 | 470 | 130 | one hundred seventy | 210 | one hundred sixty five | 13 | 30 | 70 | 23 | 192 | 212 | a hundred and forty | 146 | |
| forty-100 | 5# | forty | 476 | 497 | one hundred fifty | 210 | 265 | 198 | fifteen | 36 | 85 | 24 | 192 | 250 | 162 | 146 | ||
| a hundred and ten-a hundred and eighty | six# | fifty | 517 | 538 | one hundred seventy | 265 | 335 | 238 | 18 | fifty one | a hundred and twenty | 31.five | 192 | 308 | two hundred | 146 | ||
| 2200W | three-forty | 5# | forty | 482 | 508 | a hundred and fifty | 210 | 265 | 198 | fifteen | 36 | 85 | 24 | 220 | 250 | 162 | 160 | |
| 45-a hundred | 6# | fifty | 523 | 549 | a hundred and seventy | 265 | 335 | 238 | 18 | 51 | one hundred twenty | 31.five | 220 | 308 | two hundred | 160 | ||
| 3700W | three-10 | five# | forty | 498 | 524 | a hundred and fifty | 210 | 265 | 198 | fifteen | 36 | 85 | 24 | 220 | 250 | 162 | a hundred and sixty | |
| 15-60 | 6# | fifty | 539 | 565 | a hundred and seventy | 265 | 335 | 238 | 18 | fifty one | one hundred twenty | 31.5 | 220 | 308 | 200 | a hundred and sixty |
Note: A: With 3-section EPTT EPT A1: With three-period Steel Plate EPT A2: With 3-stage Brake EPT
Bundle Phase: Frist:we place the EPT motor into the open up-molded foam. 2nd: We set the EPT motor into the carton box. 3rd:We place the carton into the StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd export plywood. We use the a few packages to Safeguard the goods from demange.
